• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. JWMcCrary

    Explorer lower crossover radiator hose

    Has anyone used one of these for the lower hose when keeping the stock radiator? It looks just like what Summit sells for over $100. BC & WH both sell a crossover pipe but this would be cheaper and it's stainless...
  2. JWMcCrary

    Help with troubleshooting 2100 Carb

    I ordered a rebuilt carb from Rock auto last October, right when it showed up I went down with a kidney stone and by the time I was over that it was past my wheeling days for the year up here in Ohio. I bolted it on and fired it up, ran good. Put the cover on for the winter. Problem is now it...
  3. JWMcCrary

    Holley Terminator Fuel Pump - replacement

    Thought I would share this in case someone else has the same model - Holley 12-700. It never let me down but every summer on hot days it would get loud, started noticing it getting even louder, could hear it over the exhaust. Something told me I better replace and keep the one I have as a spare...
  4. JWMcCrary

    Recommendations on 110v air compressor

    Looking to buy an air compressor that will run on 110V, 20 amps. Prefer it to have wheels so can be moved around. Light duty use but would like as much as I can get in that package. Have looked a t lot of them. Home depot has a 30 gallon, 175 psi that meets this criteria for $350. That seems to...
  5. JWMcCrary

    Opinions/Experience on best full cover

    Considering leaving my broncos out this winter and covered so I can work on some projects inside the garage. Looking at early December to mid-late March most likely. Other than wind and some snow, freezing rain, sleet, LOL, just all that, I don't see any difference with how cold they would be. I...
  6. JWMcCrary

    SOLD Rear shock mounts

    Going from an inboard setup to outboard in front of the wheel. I have a set on another Bronco that Matt, Vintage Iron Fabworks built but not sure he is doing them anymore. Would be happy with another set of those. Thought I would check here to see what might be available before looking at...
  7. JWMcCrary

    OH 3 inch steel exhaust tip/turn down

    Fits 3 inch muffler, can't remember what I paid for it but it's hardly worth the hassle of boxing and shipping for less than $15, which includes shipping.
  8. JWMcCrary

    OH Wiper Motor drop Bracket

    NEW - Wiper motor drop bracket. I tore the plastic off it to take the picture. Price includes shipping, which saves you the shipping cost if buying from a vendor, I think they sell for 14.99.
  9. JWMcCrary

    OH BF Goodrich Green Bronco Poster

    I bought one of these for my son about 10 years ago, looking for another one.
  10. JWMcCrary

    SOLD Hurst V-Matic 2 Auto Shifter

    Bought this to use with a C4, decided to go with manual trans. Needs a good cleaning.
  11. JWMcCrary

    OH Kicker Speakers, New in box - PS5250

    These are intended for a motorcycle, didn't realize that when I bought them. I was going to make custom enclosures for them but decided to go a different way. These were over $200 at the time I bought them but I see them on ebay for $160ish and up. Good deal if somebody wants them before I go...
  12. JWMcCrary

    OH Yukon axle(s) with super joint for D44

    One complete Yukon 4340 chrome molly axle shaft assembly for drivers (short) side with Yukon super joint. Also included is the matching super joint that needs new caps. You can get replacement caps for $75, I looked into this before deciding to buy RCVs. A set of those joints new are about $400...
  13. JWMcCrary

    SOLD MSD 8579 Distibutor for 289/302

    Part# 8579, mechanical advance distributor. Requires an ignition box to use. Good used very little condition. See pics.
  14. JWMcCrary

    SOLD Stock hubs with BCB centers

    Stock hubs with BCB centers, never used after centers were replaced (BCB centers are new). See pics, what you see in the pic is what is included.
  15. JWMcCrary

    SOLD Fuel sender for aux tank

    Bought new and used in new poly side tank. Did away with side tank. Was working fine when removed. See pics
  16. JWMcCrary

    OH 30 spline hubs for use with RCV - Dana 44

    Warn 30 spline hubs for use with RCV axles on D44. The 2 hubs in 1st pic are good and ready to go. 2nd set is damaged but can put together 1 hub to have a spare. See pics. One of the 30 spline center pieces has had about 1/4 inch stripped on edge of splines as seen on the pic. I flipped it...
  17. JWMcCrary

    OH Stage 8 locking header bolt kit

    I used these on a set of Duff long tubes and never had a loose bolt. Changed to shorties and was keeping these with the headers for another bronco but decided to stay with manifolds. I'm missing 1 lock ring and 1 clip but all the bolts are there. 3 clips were trimmed to clear header tube. See pic.
  18. JWMcCrary

    Centech wiring and power problem

    This bronco doesn’t have a heater so when the harness was installed I used the 20 amp heater circuit/wire to power 3 gauges and the switch that turns on the relay for the fuel pump. Has worked fine for several months. All of a sudden it is losing power prior to the fuse box, it also lost power...
  19. JWMcCrary

    Opinions on replacing Oil Pan

    This motor was in when I bought this Bronco, no idea what it came out of and has what I don't think is an "Early Bronco" pan (correct me if I'm wrong). However it does not interfere with anything and it's been twisted up pretty good and bounced around. As you can see from the pics the rear main...
  20. JWMcCrary

    OH 4.86 gears (ring & pinion) for 9 inch

    Thought I would see if anybody had a good used set laying around.
Top