• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. JWMcCrary

    SOLD 1976 Tailgate

    No rust that I can see on it but it does have some damage, see pics Pickup only
  2. JWMcCrary

    SOLD Wildhorse shocks - 8

    These came with a 3.5 WH suspension kit. The front shocks were run very little before I started making changes to my setup. The fronts are for use with a shock hoop, the rears have one in the stock location and the other in front of the axle using the stock type mount. I ran the rears for quite...
  3. JWMcCrary

    MS Rancho RS9000 adjustable shocks

    Pair of Rancho RS9000 adjustable shocks. I bought these used from a member here but never used them.
  4. JWMcCrary

    MS 66-75 drop pitman arm

    Wildhorses drop pitman arm, it has been drilled for heim steering (3/4) It's the 66-75, I used it for a while on my 73.
  5. JWMcCrary

    SOLD Stock tire carrier with mounts & latch

    See pic. Comes with 2 sets of mounts and a latch that goes on the tailgate. Pickup only
  6. JWMcCrary

    SOLD Hood

    The pics are pretty much the description. Repairable but has issues. Took pics of the bad spots. Pickup only, understand it may be delayed
  7. JWMcCrary

    SOLD Repairable Doors - Set 2

    The pics are pretty much the description. Doors are fairly straight and not rusty but will need work. Include everything you see. I think these have removeable frames, included pics that I think show that, but you have to decide as I'm not familiar with the differences. Pickup only, understand...
  8. JWMcCrary

    SOLD Repairable doors - Set 1

    The pics are pretty much the description. Doors are fairly straight and not rusty but need a lot of work. Include everything you see. The closeup picture is where some sanding was done (not by me) No door glass in one of them but the regulator is laying the bottom, no idea how good it is...
  9. JWMcCrary

    MS Complete dual exhaust with headers

    Duff long tube headers, Flowmaster hushpower mufflers, and piping. The tailpipes dump under the body behind the rear axle before the bumper. I ran these for several years. Headers are in good shape. Mufflers in good shape, should be bolt on with new gaskets and you would need a couple hangers...
  10. JWMcCrary

    MS 1976 Frame, glove box door, title, axles

    1976 frame that was wire brushed, wire wheeled, etc to clean up and then painted with POR 15. It has F250 shock mounts on the front and WH inboard shock mounts on the rear. It was setup for 3.5 suspension and then later all removed. (no suspension included but the 9 inch does have stock leaf...
  11. JWMcCrary

    SOLD 1972 Bronco V8 3 speed - Major Project

    I bought this in 2007. The first pic is on the trailer after I picked it up at a deer camp. We started a tear down on it but didn't get far before it was pushed to the side. The hood, doors, top, interior, dash and steering column were all removed but are there and go with it. I also have the...
  12. JWMcCrary

    Alternator charging question

    Stock alternator and regulator, both we new in 2017. Been running fine but the voltage has been low at idle, under 12(like its only reading battery), give it just a little bit of throttle and voltage jump up to 14+. Never really concerned myself with it until now. Just switched to Sniper EFI...
  13. JWMcCrary

    OH Billet alternator bracket - adjuster - Vbelt type

    Just took this off my 351W and is complete. Below is a link to the one I think it is but can't remember exactly but it's certainly close if not it. Will update with pics tomorrow. Includes shipping Local US https://www.summitracing.com/parts/mch-30391/overview/make/ford
  14. JWMcCrary

    SOLD BC's 2 grove aluminum water pump pulley

    BC Broncos 2 grove aluminum water pump pulley. Switched to Explorer front so no longer need. Will need to be polished to look like new but will clean before shipping. Price includes shipping local US.
  15. JWMcCrary

    WH Saginaw bracket for Explorer - on a 351W

    It's intended to be used on 5.0/302 since it uses a stud on the water pump instead of all the bolts being into the head. Curious if anybody has adapted to use on a 351W ? If so a few details and pics would be great.
  16. JWMcCrary

    Remote reservoir for explorer PS pump

    Found this reservoir at Summit, considering adding this while doing the front explorer dress swap. Thinking I can drill the side of this tank an add a 2nd return to do away with the T I have in my current setup with hydroboost. Thoughts? https://www.summitracing.com/parts/mor-63490
  17. JWMcCrary

    OH Anybody need a carburetor ? Selling several - Prices and pics added

    Now that both of my Broncos are fuel injected I don't need all the carburetor stuff under my feet. Listing them a little early to see if there is any interest, will take pics and add to this post this weekend with prices. 1 - Holley 670 TA - This carburetor was sent back to Holley to confirm it...
  18. JWMcCrary

    Installing Explorer serp setup - Alternator question

    Switching out the Vbelt stuff for the Explorer setup, trying to have a good handle on everything before I start. Currently I have a 3G alternator that I got years ago, installed when I put in the painless harness, not in front of it right now but from what I remember it has the positive cable to...
  19. JWMcCrary

    Sniper 2V install . . . first startup

    This is a video from the first startup last night, runs good, everything checks good, fuel pressure right where it's supposed to be. I let run long enough to get above 160 temp and adjusted the idle rpm and check for any leaks. This was last night, plan to drive it around some later today. My...
  20. JWMcCrary

    Explorer 4G Alternator on eBay

    Has anyone purchased one of these? Results? Says it's new...when I search 4G for Explorer 5.0 what I find is consistently in the $130 to $200 range...except for this one. Quite a savings but curious if I'm missing something...
Top