• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. Tedster100

    Black Crude should not.........

    Double check your vent while you're at it. Blocked vent made mine crap oil, un-plugged and it solved the issue.
  2. Tedster100

    How Bout A Little "Best In Show"!!!!

    Very nice, well deserved!
  3. Tedster100

    May it forward....MAY 16, 2015!!!! Central Massachusetts

    Very nice, looks like good backspacing too! I actually have a set of 17" rims I picked up. My 15's are too close to the tie rod ends. Just need to get some new rubber before the roundup.
  4. Tedster100

    May it forward....MAY 16, 2015!!!! Central Massachusetts

    HaHa, I think I put that much in the bumper bucket at the Roundup but some big ugly guy won the dang thing! I took another $100 & bought some steel so I'm tapped out on bumpers for now. I could use one of those bikini car washes though! Now if you were raffling some old school slots.....
  5. Tedster100

    May it forward....MAY 16, 2015!!!! Central Massachusetts

    Sure, noooowwww there's free bumpers! %)
  6. Tedster100

    OH Np435 / 205

    I have a complete NP435 mated to a NP205 with cast iron bell housing, custom cross member, etc.. I had this in my Bronco and loved it, the only reason I took it out was I changed axles to put a set with lockers in and with the lockers I was limited in axle gear ratio's I could run so I ended up...
  7. Tedster100

    May it forward....MAY 16, 2015!!!! Central Massachusetts

    If I could be there I would.... my Leer Jet is in the shop:(
  8. Tedster100

    2015 Super Celebration Pix

    Yea, they look like they're thinking "what in tarnation?" Got my picture with "Monster Mike" too minus the questionable attire on my part.%)
  9. Tedster100

    Daves 71 NH Build

    She's a beaut Clark! That should give you a jump start for sure!
  10. Tedster100

    2015 Super Celebration Pix

    Doing the Dragon! Had a blast.
  11. Tedster100

    2015 Super Celebration Pix

    A few pictures..
  12. Tedster100

    New Bumper for Old School Winch Build Thread

    Ok, been a while so today I got the last of the welding & tweeking done. All the winch parts are powder coated and 50% assembled. She's etched & ready for primer & paint.
  13. Tedster100

    MEB East Coast Bronco Roundup June 25-27 2015, Registration CLOSES JUNE 8TH!

    ^^ It's fresh, he hit it on the way in..
  14. Tedster100

    What have you done to your Bronco today?

    That's great Randy!
  15. Tedster100

    Np435

    Going from the 435 to ZF isn't that bad but it's not that easy either. Notch the ZF to clear the shift rail, I used JB Fab twin sticks. Cut the tunnel, get rid of clutch linkage, install ZF master cyl, I used BC Broncos ZF cross member and made a support for the NP205 myself, modify...
  16. Tedster100

    Np435

    I ran this, exact setup & loved it. 435/205 3.50 gears 33" tires. Granny gear in NP435 is great & unless you're doing a lot of serious crawling the gearing is pretty good. I made a custom cross member, tunnel cover and gear banger for it. Had to switch when I swapped axles, the axles I...
  17. Tedster100

    What other classic projects are in your garage (pics)

    No big projects right now, just little ones. Building a bumper & restoring a couple 8274's right now. Here's my 73 and 48 Harley WL. Seriously considering selling the WL & building another Bronco.
Top