• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Np435

KAllen

Full Member
Joined
Sep 22, 2014
Messages
335
Loc.
Talking Rock
Thinking of swapping in an np435 trans and a np205 case

Just curious if anyone has done this so I can get some pointers
 

AxlesUp

Sr. Member
Joined
Dec 21, 2001
Messages
424
Loc.
Collierville TN
i have not done it but my bronco has that setup in it :)

the gearing is amazing, but it is a bit of a chore to shift.

my tunnel cover was raised for sure and i have a massive flat belly skid plate that everything seems to attach too.
 

mortimersnerd

Sr. Member
Joined
Aug 25, 2010
Messages
743
I've got an np435 and Dana 20. I like it, but am glad to have the lower gears of the d20. What axle gears and tire size are you running? You'll lose gearing with the 205.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
The 435 and D20 combo is nice as you can keep the transfer case in the stock location and use the stock driveshafts. Use the original crossmember in the original location.

While the 205 is stupid strong, the gearing isn't as good. What you save by not getting an adaptor for the D20 you are probably going to spend on the transfer case, correct yokes, and reworking the driveshafts to fit.

Using the 435 and D20 there is little more than poking a (big) hole in the floor for the shifter. 435/205 is suddenly a lot more work and a bunch of little nickel and dime expenses. I know of a lot of 435 conversions, I can't think of any that used the 205.
 
OP
OP
KAllen

KAllen

Full Member
Joined
Sep 22, 2014
Messages
335
Loc.
Talking Rock
np 435

gears will be stock 3:50

tire size will be no bigger than 33

any pictures of this install would be great
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
Pictures of 33's on bronco

.. Here's mine .....

...1st is my Bronc up on 33 ..
...2nd is the NP435 shifter showing & along with the twin sticks. Also notice the Hand Throttle on the shifter handle
..3rd is just another picture of my Bronco with 33's loaded with the Np435 .
........
... I didn't have to make any adjustments to the drive shafts. Other than swapping the yokes from front to back.
 

Attachments

  • DSCN5372.jpg
    DSCN5372.jpg
    124.9 KB · Views: 53
  • DSCN6000.jpg
    DSCN6000.jpg
    110.5 KB · Views: 107
  • P1010001 6.jpg
    P1010001 6.jpg
    165.6 KB · Views: 50
Last edited:

AxlesUp

Sr. Member
Joined
Dec 21, 2001
Messages
424
Loc.
Collierville TN
a few pics.

once i get the steering back on its off to the pressure washer!
 

Attachments

  • 73eb4.jpg
    73eb4.jpg
    111.6 KB · Views: 62
  • chasis.jpg
    chasis.jpg
    83.5 KB · Views: 63
  • DSCF1781.jpg
    DSCF1781.jpg
    128.7 KB · Views: 65
  • DSCF1777.jpg
    DSCF1777.jpg
    97.6 KB · Views: 66
  • DSCF1775.jpg
    DSCF1775.jpg
    74.1 KB · Views: 79
  • DSCF1773.jpg
    DSCF1773.jpg
    104.2 KB · Views: 89
  • DSCF1771.jpg
    DSCF1771.jpg
    131.5 KB · Views: 74
  • DSCF1767.jpg
    DSCF1767.jpg
    112.5 KB · Views: 72

LOVNBRONCOS

Sr. Member
Joined
Mar 6, 2012
Messages
462
Loc.
Tucson, Az
Here's a few pictures, Wild horse gear banger makes it shift great.
 

Attachments

  • finished tunnel covers 005 (Copy).JPG
    finished tunnel covers 005 (Copy).JPG
    203.2 KB · Views: 98
  • Tunnel covers 012 (Copy).JPG
    Tunnel covers 012 (Copy).JPG
    134 KB · Views: 67
  • Tunnel covers 020 (Copy).JPG
    Tunnel covers 020 (Copy).JPG
    143.3 KB · Views: 68
  • NP435 Installed 2 001 (Copy).JPG
    NP435 Installed 2 001 (Copy).JPG
    287.3 KB · Views: 72
  • NP435 installed 003 (Copy).JPG
    NP435 installed 003 (Copy).JPG
    268.2 KB · Views: 81
  • finished tunnel covers 008 (Copy).JPG
    finished tunnel covers 008 (Copy).JPG
    208.7 KB · Views: 89

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
gears will be stock 3:50

tire size will be no bigger than 33

any pictures of this install would be great

I ran this, exact setup & loved it. 435/205 3.50 gears 33" tires. Granny gear in NP435 is great & unless you're doing a lot of serious crawling the gearing is pretty good. I made a custom cross member, tunnel cover and gear banger for it. Had to switch when I swapped axles, the axles I picked up had 4.10's and lockers so I couldn't go back to 3.50's and the gearing was not suitable for the highway with the higher axle gears so I swapped a ZF in. I've actually got the whole 435/205 set up sitting on a shelf if anyone's interested.
 

AxlesUp

Sr. Member
Joined
Dec 21, 2001
Messages
424
Loc.
Collierville TN
what did you change to swap in the ZF and what did you use for a t-case?

i really thought i had the sole crazy shifter lol honestly it works rather well.


let me know if you need any more pics.
 

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
Going from the 435 to ZF isn't that bad but it's not that easy either. Notch the ZF to clear the shift rail, I used JB Fab twin sticks. Cut the tunnel, get rid of clutch linkage, install ZF master cyl, I used BC Broncos ZF cross member and made a support for the NP205 myself, modify driveshafts, bolt it up. There's a lot of little details but if you do the prep and line all the parts up it can be done in a weekend.
 
Top