• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. moses_m

    Bilstein 5165 - Advice on which set up i should get

    went with 2.5 wild horse and bilis as well. Had no issues going up the dunes in cuervos but they are smaller. Have not tried the bigger dunes on the other side of san luis. reyna cruz etc. Maybe this fall or winter I can catch a travesia or poker run that way. Have you tried taking one off...
  2. moses_m

    Buying a Bronco registered and titled in Mexico, and registering it in CA.

    Did it last year on a 72. Bought it in San Luis Sonora and registered in texas. If the owner lives in the US go to the dmv with him and you can transfer (carta de circulation) Mexican title right there with a notarized bill of sale. Get a 5 day permit from DMV and state what port of entry...
  3. moses_m

    Bronco tow rig 6.7 Ford Diesel 7/1 Wrapup

    My 11 now has 100k on it. I elected not to flash mine but I do keep a extra exhaust sensor with me. If you are stranded like I was once. Swap the first and last exhaust sensor so you can limp it home. They are part #AC3Z-5J213-B and are now like 55 on Amazon. Also go ahead and buy a new fuel...
  4. moses_m

    To sell or Not to sell - The delimina

    I would list at 30k and settle somewhere between 30k and no less than 25k if you want to move it quick. Or step away from it for a while, have someone else fix the leak.
  5. moses_m

    Fuel Starvation? New Pump?

    sweet where did you install it?
  6. moses_m

    Wheel spacers...need opinions

    I ran with the WH spacer and nuts on my 76 D44.
  7. moses_m

    Suggestions on Tires for 73 Bronco

    X2 on Cooper discovers run them on my current oilfield truck 80 on the freeway and 30 mph on ugly oilfield lease roads
  8. moses_m

    Found a basket case 77

    The cordova bridge has inspection officer. Take it first too County Auto Theft officer. They are the same officers who VIN trailers,dunebuggys etc. Make sure the VIN on frame matches glove box if it doesnt remove glove box. The one on the frame is the one the officer is looking for since it...
  9. moses_m

    Found a basket case 77

    Misread Its already here so half the work is done. Here is the link I used for info http://www.dmv.tx.gov/component/k2/item/55-out-of-state-and-imported-vehicles
  10. moses_m

    Found a basket case 77

    Fastwest I just transfered one over the summer. Bought it in Sonora and titled it here in Texas. Would of done it in Arizona but the port of entry inspection station in Yuma is by appointment only. Get the vin number and take it too the DMV to make sure it is not stolen has a lien etc. Get a...
  11. moses_m

    RTV in place of 9 inch gasket...

    Have to agree just did swap on gears front and back sealed up great. Been in the dunes twice since swap no leaks.
  12. moses_m

    cooling problems

    What thermostat 180 190? Electric fan? Standard fan? Clutch fan? Shroud? Which water pump?
  13. moses_m

    Her Maiden Voyage - Big Bend NP

    U might want to check if they are having a star show at the Observatory in Ft Davis. They usually start around 10 pm.
  14. moses_m

    Porto-Power Uses?

    We use them regularly at work to line up large items like electric traction motors to mudpumps and drawworks. Great tool when used properly. Ive always liked the manual ones with the hand pump over the electric ones. Just a little safer.
  15. moses_m

    SOLD Complete set of custom seats from Toms Bronco Parts

    True but the beers are that much refreshing in the 110 plus heat.
  16. moses_m

    How do you get this off?

    Just did this in december when I did dana 44 swap. Beat the hell out of it with BFH and then went to store and bought this http://www.oreillyauto.com/site/c/detail/PFM0/W142/N2416.oap?ck=Search_pitman+arm+pullers_-1_-1&keyword=pitman+arm+pullers
  17. moses_m

    Almost like light lenses without frames

    I think it would look sweet if you painted the light trims black to match flares. Just a thought
  18. moses_m

    SOLD Complete set of custom seats from Toms Bronco Parts

    Will pm you when I go to Yuma in the summer. You may or maynot still have them but its worth a shot.
  19. moses_m

    Full width 9 inch build…31 or 35 spline

    Toms does theirs inhouse as well. They can build you what they want as well.
  20. moses_m

    Gauges and dash

    http://classicbroncos.com/forums/showthread.php?t=238577 Might want to pm this member. He might still have this one for sale. Could be a good deal.
Top