• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. moses_m

    76-77 dana 44 measurement

    Sorry should of stated that it is still loose. Want to get everything mocked up before I tighten down. 45lbs is what directions recommended
  2. moses_m

    TX spare parts

    Maybe after the end of the year.
  3. moses_m

    76-77 dana 44 measurement

    The kit I got from toms had a couple extra bolts and nuts. Do all rods just take one jam nut like in pic?
  4. moses_m

    TX spare parts

    parts TTT keeping dana 44 and parts Upgraded ford 9 third member and 31 spline 28 spline 2 7/8 small bearing axle shafts and retaining clips bought new in 2012 from toms. $100 complete third member limited slip 3.50 gears $250 matching ring and pinion for dana 44 3.50 gears $50 taking offers...
  5. moses_m

    351W Balance Questions

    had the same issue there is a good write up on tech articles. You can get a adapter pulley from driven or rebalance 50oz to 28oz. damperdudes sells them or they can rebalance for you as well. I bought one from damper dudes
  6. moses_m

    Updating to Dana 44 on 69

    garbez I believe got me the measurement. Using Toms heim steering linkage. 2. Bought WH extension 1462 for lift. Stainless lines that screw in too block (1462) on top of dana 44 go in fine, but stainless too either caliper dont fit. So yes I need either 3185 or 3188. The one with the...
  7. moses_m

    76-77 dana 44 measurement

    whats the different in the trac bar mount? I know the 76 77 track bar is longer than previous years. My bronco is a 69, will my trac bar work? What do I have to do it to make it work with 76 track bar.
  8. moses_m

    76-77 dana 44 measurement

    Yea thats what Im thinking. Have never run spacers. Dont like the thought of adding more parts. Might go to 17" wheel and maybe so it clears everything.
  9. moses_m

    Aftermarket Wheel Pics

    Whats the backspacing on those? Do they offer several backspacing sizes in the 16s. I have a 76 dana 44 and clearance is a issue for me. Im in the same boat black yumas or pro comp la paz. I was at 4wheel parts last week and I liked the mt baja claw and the maxxis intrepider. I currently run...
  10. moses_m

    Updating to Dana 44 on 69

    update pics added. Getting closer. I ran it a week with the WH 2.5 in lift the rear and the dana 30rancho 2 inch lift in the front while I was waiting for the gear swap on the dana 44. stock 3.50 was running like 2300 at 75 4.56 ran 2700 at 75 mph.
  11. moses_m

    76-77 dana 44 measurement

    thanks exactly what I needed. So you went under? Do you have castle nut on top? What size rims and backspacing are you running? My current rims are 15X10 with 4 inch backspacing. Will that work or do I need a spacer?
  12. moses_m

    Updating to Dana 44 on 69

    Update picked up 76 dana 44 from cb member and had 4wheel parts install 4.56 Finished installing 2.5 wildhorses lift in the rear. Updated ford 9 to 31 spline 4.56 gears and grizz locker from toms. Removed dana 30 and started dressing 44 tonight and ran to some issues. 1. Need a ballpark...
  13. moses_m

    76-77 dana 44 measurement

    I need a ballpark measurement from center to center on knuckles for a 76-77 dana 44 front axle. Grabbed a 76 dana 44 from a fellow member and installing heim style steering from toms. Had dana 30 before so I cant use that measurement. Thanks.
  14. moses_m

    budget on board air?

    X2 on the master flow. Works great. I have one on work truck that I throw in the bronco when going to the dunes.
  15. moses_m

    Is Anyone . . .

    Yea thats what I ve seen. Im thinking mickey thompson baja classics black or the pro comps black since I cant find any yumas in 15X10.
  16. moses_m

    Is Anyone . . .

    sweet rims have you seen the black yumas in 15X10 anywhere?
  17. moses_m

    Dana 44 carrier

    Going to spend more money and buy a rebuilt dana 44 with the gears I want in it. Going to sell or return all the parts I have. With the quotes I received and 2 days of missing some work to drop off and pick up differential just doesnt make financial sense to me anymore. Thanks for all your help.
  18. moses_m

    TX spare parts

    Headed west Going different route bought this from fellow member selling Rebuilt 76-77 Dana 44,with locker,3.50,gears,disk brakes OEM hubs and axles. New seals,bearings,blue bushings never ran since rebuilt $1400 or OBO I just received new 4.56 thick motive gears ($250)and motive install...
  19. moses_m

    Dana 44 carrier

    I just need the front done I bought a complete third member for the rear.
Top