• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. moses_m

    Another rough day

    Are you gonna run the same tires? Have you looked into other options?
  2. moses_m

    PLS HELP! Fouling Plugs

    check your timing as well I had the same issue going from mexicali 200 ft up the continetal divide 4500 ft back down to WTX 2700 ft. We adjusted timing and carb. I run msd dis with 6al box and the edlebrock avs carb.
  3. moses_m

    crappy road trip on the 4th

    Have you thought about installing a fuel pressure guage by carb? How much psi is your new pump suppose to put out?
  4. moses_m

    Late model302 balancer

    Most of the vendors sell the 5.0 crossover hoses.
  5. moses_m

    Any suggestions for covering the original radio holes in the dash?

    Cover plate I installed a plate over hole and installed guages.
  6. moses_m

    Fuel Problem

    I dont believe the filter is your issue. I read that your pump bolts were loose. If your ground was connected to one of them that could make your pump not work. Several people including myself run a filter before electric pump. I run the Carter 4070 and I also installed a single fuel line...
  7. moses_m

    NV3550 swap

    look at the toms nv3500 5 part install on youtube.
  8. moses_m

    molded in flares

    fiberglass flares We used the ones from toms with their hardware.
  9. moses_m

    What steering wheel looks right on EBs?

    another vote for Le Cerra 15 leather wrapped
  10. moses_m

    Securing Bronco to Trailer

    I do the Cal to TX trip twice a year. I wrap chains around the axles and use chain come alongs and chain booms. Like above I let the bronco suspension do its work. I would worry more about the tires on any rental trailer.
  11. moses_m

    The possible mass buy on the champion aluminum radiator is a go

    radiator I just drove yesterday from Yuma Arizona to Pecos Texas nearly 800 miles 12hrs average temperature was 105 F. I installed bypass champion radiator,shroud and their fan. Average engine temp was 220 F during the day and 200 at night. Temp would increase on hills but I did not adjust...
  12. moses_m

    block confirmation

    Motor shakes at start up and when accelerating with 50 oz. Besides machining down my explorer 50oz or buying a new one what are my options? Has anyone tried the pro steet balancers with the counter weights? Read the tech article. Has anyone tried the adapter pulley from drivenautoparts?
  13. moses_m

    TX Lots of Bronco Parts

    3rd in line for bumpers if deals fall through.
  14. moses_m

    Complete Floor Pan and Platform Set

    Wild horses has it as well. Would check shipping on both since it is big and bulky.
  15. moses_m

    SOLD stock Front seats and rear bench

    Everythings possible I have several coworkers that drive back and forth from the DFW metroplex area. They will need some gas money of course.
  16. moses_m

    broken windshield fold down knob..

    X2 on the welding the nut or bolt. Use of plenty of wd 40 or penetrating oil on broken piece of course after weld. If you turn it too hard the square nut that is inside the windshield frame will break and spin freely and that is when you will have to cut it out like me. Or if you have a full...
  17. moses_m

    my car trailer

    Nice trailer check the hubs and bearings to be safe. Kinedyne ratchet straps and chains are what truckers use. So that is what I use.
Top