• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. moses_m

    Edelbrock 1826 Thunder Series AVS

    Is the adapter plate pretty straight forward along with linkage if I installed a q jet on a eddlebrock intake?
  2. moses_m

    Updating to Dana 44 on 69

    probably leaning with 33s hit the flares a couple of times already at dunes. Old suspension gonna update that as well with yalls 2.5 bilis suspension. Has great reviews
  3. moses_m

    Updating to Dana 44 on 69

    No stroker just bored out. Inventory would look nice in new digs.
  4. moses_m

    Updating to Dana 44 on 69

    65 mph 5th gear 2k rpms Works great around here but when I was on I-5 north of sacremento into oregon I had to constantly drop down to 4th gear in the mountains and give it some gas to use the 5th gear.
  5. moses_m

    Updating to Dana 44 on 69

    DYNO 08 383 HP motor and your right 281 at the wheels. Do yall sell complete differentials with disc brakes axles etc? Didnt see it on website just saw call for pricing in the magazine in the third member section.
  6. moses_m

    Updating to Dana 44 on 69

    She starts to get up at 2500 Pinion broke close to the top of dune. Like you stated probably the flexing. Have never heard of the pre tension caps but will look into it. Thanks again
  7. moses_m

    Updating to Dana 44 on 69

    Thanks Currently have stock 3.50 stock axles have been replaced as one broke last year along with dana 30 pinion. Here is a good pic of engine. Since pic have gone to explorer front dress and champ radiator electric fan setup. Cam specs on first post. Top end is all edlebrock rpm heads,air...
  8. moses_m

    Edelbrock 1826 Thunder Series AVS

    TTT Anybody else running this carb? I looked on the summit page and it has several good reviews as does the holley 4160. Currently running a Eddlebrock 1407 and the swap too the thunder avs would be pretty easy. My 1407 along with carter 4070 actually did pretty good last year at the dunes...
  9. moses_m

    Updating to Dana 44 on 69

    gonna try to get a new or rebuilt 44. Will 1st gear still be usable with the 4.88 gears? When I am at the dunes I run the j transfer in high high and tranny in first gear then punch it into 2nd at the base of the dune. Have had real good success running up steep dunes that way.
  10. moses_m

    Updating to Dana 44 on 69

    okay all depends with newer 2.5 lift 2 body. I hit the flares a couple of times on the whoops with the 33s.
  11. moses_m

    Updating to Dana 44 on 69

    Updating to Dana 44 this year for the dunes. Broke pinion on 30 last year near glamis. Thinking of running 4.56 gears. 302 roughly 380 hp. NV3550 with 33s pending approval for 35s. Bronco used around town, highway, and dunes. If a 350 cheby Heep pulls up next to me I will be gunning it up...
  12. moses_m

    Flared rear quarter panel... Anyone install this yet?

    flares bought mine from toms. Will do the same on next bronco project
  13. moses_m

    LA vin/title

    pm delconick he had some a couple months back when I was looking for one
  14. moses_m

    TX $old

    sent u a pm
  15. moses_m

    TX 66 U13? (not mine)

    how is the tub itself rust wise?
  16. moses_m

    wild ride

    http://www.wildhorses4x4.com/category/s?keyword=timing+pointer this is the one for the stock setup. the explorer setup one is more pricey. jegs, summit all carry them.
  17. moses_m

    Electric hoist for top

    winch used the same winch. So far so good
  18. moses_m

    Calibrating fuel gauge for 23g tank?

    I had the same issue with a AuX tank. Then bought a adjustable sending unit and problem solved. I ran with a cheap auto zone sun pro unit. Tested it like 10 times before I installed in tank. Made sure ohms matched gauge and vice versa. Been running it now over 1 year now. No more IVR went...
  19. moses_m

    Overheating at idle, running out of ideas (Update: overheat at load now, not idle)

    There is a thread here somewhere for a napa fan clutch and parts. Also I agree with a good thermostat. Had kind of the same issue was running around 210 in the heat. Updated to a high flow thermostat now running around 185 in the 100 plus heat.
Top