• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. wesleydax

    P0300 cold start stumble

    Didn't know it had one. should the alt. be producing charge voltage instantly?
  2. wesleydax

    P0300 cold start stumble

    99 5.0 efi. after it sits for over an hour ish. It will stumble and almost want to die. Does this for about 15sec and then clears out and runs great. No throttle responce issues, ac compressor cycling on and off does not faze it. If you shut it off and crank it back with in the hour ish it...
  3. wesleydax

    Hydro Boost Hoses

    its plastic
  4. wesleydax

    Hydro Boost Hoses

    i drilled and tapped my res. and put a 3/8 i think barb fitting. essentially make it a dual return and theres no chance of the return fighting each other
  5. wesleydax

    Air Conditioning Options - Budget

    Installed vintage air a couple weeks ago. so far i love it. rampage soft top and no window tint and it does a good job. not like a new car but like the others have said theres no insulation. If your fair with tools you could do the install then just take it to the ac shop and have it charged.
  6. wesleydax

    Top off, now what?

    cordless impact and a swivel;D
  7. wesleydax

    9" bearings. which ones

    move east. 73 and light rain on my back porch.
  8. wesleydax

    9" bearings. which ones

    i got disc rear. and no motivation at all today or i would have torn it down already. Thanks guys for the help.
  9. wesleydax

    9" bearings. which ones

    well that clears it up. I was thinking i had a choice. i know my retainers are bowed and stuff would these work as replacements and still hold the seal http://www.strangeengineering.net/make-and-model/ford/axle-packages-components/retainer-plates/early-big-ford-retainer-plate-ea.html
  10. wesleydax

    9" bearings. which ones

    im going to take mine apart first like you said. If i have the tapered bearing with seal can the set 20 sealed bearing be used? or do i have to go back with the seal and bearing? i know i making this more complicated than it has to be but if theres something better thats the way i want to go
  11. wesleydax

    9" bearings. which ones

    would these be the correct ones. http://www.summitracing.com/parts/str-a1013
  12. wesleydax

    9" bearings. which ones

    Thanks Bax, is there a certain kit you would recommend?
  13. wesleydax

    9" bearings. which ones

    I have an axle seal leaking and obviously need to replace it. Can an of y'all tell by the picture which bearing I have? I think its large bearing but its been a good 25 years since I've been in to this thing. Is there an up graded bearing and seal now. I do remember last time having to put...
  14. wesleydax

    Anyone have a "Stated Rate" insurance policy?

    american modern is who i have my eb and 66 mustang with. both are 25k eack agreed value. had a claim on the mustang a few years ago and had no problems with them at all.
  15. wesleydax

    Rain makes Bronco start ??????

    never heard of such. maybe a water hose and wet one area at a time to try and pin point it.
  16. wesleydax

    do lug nuts go bad

    Glad you caught it before it passed you. I had to re tighten mine a couple times yesterday. Took the pull handle with me and every 10 or 15 miles i would stop and check them. after a couple times there staying tight now.
  17. wesleydax

    do lug nuts go bad

    and by loose you can barley hear the wheel squeaking/popping at low rpm there not floppy loose
  18. wesleydax

    do lug nuts go bad

    nope dont think so its been locked up in the garage. I did drive it a little this evening brought it back and the dang things were loose again. I torqued them to 100fp initially. Soooo this time i used the pull handle and tightened the crap outta them. drove another 20 miles or so and not...
  19. wesleydax

    do lug nuts go bad

    Wheel was in good shape. I caught it before it was damaged
  20. wesleydax

    do lug nuts go bad

    got the new studs pressed in and everything's tight. hopefully it stays that way
Top