• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. chuzie

    500psi T-Bird Calipers

    Yes, thank you Well, let me tell you what effect it has on performance my friend... it gave me pressure at the caliper!! WTF? We entertained this idea early on by came to the consensus that, in theory, it shouldn't matter, so I have some questions to ask CPP tomorrow for sure! This is a major...
  2. chuzie

    500psi T-Bird Calipers

    Took out 0.032" and zero change in pressure, though slight change in engagement at the pedal as expected. We can take the actuator rod to MC piston gap off the table. Someone check my math and I think it was touched on This was mentioned early in the process and I want to circle back around. I...
  3. chuzie

    500psi T-Bird Calipers

    Ya man, send that P/N my way please. May also try to insert something into the piston cavity to take up 0.020" of that gap just for grins. If anything, it'll give me another excuse to throw tools across the shop.
  4. chuzie

    500psi T-Bird Calipers

    Pedal consistently takes an initial jump when released then takes 3-5 seconds to slowly come to rest. This is both with the MC blocked and plumbed. I can only assume it is the nature of this HB or there is air in the HB lines but I haven't observed any bubbles in the PS reservoir. I can now...
  5. chuzie

    500psi T-Bird Calipers

    Probably a few threads on both issues
  6. chuzie

    500psi T-Bird Calipers

    Hell, at this point, I can't confirm squat; too many iterations and now lost in the weeds. Good questions though. I'll run out to the shop to accomplish just to double check. (y)
  7. chuzie

    500psi T-Bird Calipers

    Mine don't need cranking. The issue some people have is with the bleeder is open and air is seen in the bleeder hose. This air may just be ambient getting past the threads rather than coming from the system. I find if I place axial pressure on the bleeder it helps reduce/ eliminate the issue...
  8. chuzie

    500psi T-Bird Calipers

    You are correct. One of the initial readings I took was at the tee above the front differential. Removed the driver side hard line and measured pressure directly from the tee with the passenger side still attached. Reading was about 1500psi. I then removed the passenger side caliper and lines...
  9. chuzie

    500psi T-Bird Calipers

    2500 psi without caliper 500-700 with caliper Played that game this morning
  10. chuzie

    500psi T-Bird Calipers

    Look closer. There's two big 1"+ cast plates from my hydraulic press sandwiched in there. That piece of .125 flat was just to take up the last bit of space so I didn't have to deal with retracting the piston to get the caliper reinstalled. You lost me with the nomenclature. Which other line /...
  11. chuzie

    500psi T-Bird Calipers

    New hose and no flex as measured with caliper You're absolutely right, but in this last test, were dealing with 10" of hard line, another 10" of hose and a caliper; nothing else in the system. I imagine that caliper would need to be mostly full of air to compress 2000 psi, no? Good call on the...
  12. chuzie

    500psi T-Bird Calipers

    Doesn't get any more direct connect than this boys. 700psi at the caliper directly off MC. Someone explain this madness.
  13. chuzie

    500psi T-Bird Calipers

    Makes sense. I see no evidence of this happening though. The caliper travels freely along the knuckle when the retainer is removed and the pads rest flush against the rotor. Additionally, removed the pads to ensure additional movement area is available as they wear down. Totally agree. I was...
  14. chuzie

    500psi T-Bird Calipers

    Did some more tests and came back inside to thaw out. With rear brakes plugged off... - Front driver caliper = 500psi (no change) - Pedal resting height from floor = 5.75" - Pedal min height from floor -- Engine ON = 2.75" -- Engine OFF = 1.5" - 1.5 oz of fluid after 5 pumps from caliper...
  15. chuzie

    500psi T-Bird Calipers

    https://www.summitracing.com/parts/TSB-A1704
  16. chuzie

    500psi T-Bird Calipers

    Another thought... I think it's safe to assume I've NEVER had decent brakes since acquiring the Bronco is 2000 (yes, sad and unacceptable). That said, I likely have no reference for what proper clearance and movement / travel should look like on this rig. I'm guessing I should pull the pads and...
  17. chuzie

    500psi T-Bird Calipers

    I will check that today. Of note, I did, and have previously needed to tap the lower part of the calipers to encourage them to enter lower arm of the knuckle. They definitely don't just plop into the knuckle without resistance. I didn't have this slow pedal return when I was running manual...
  18. chuzie

    500psi T-Bird Calipers

    2500 directly at mc port 1500 was at frame to axle hose tee above axle measured at driver port (caliper and hose disconnected) with passenger side caliper still connected. Once passenger side was disconnected and plugged, 2500 was achieved. Yep, exactly what I'm thinking too. Absolutely...
  19. chuzie

    500psi T-Bird Calipers

    No, I have had it backwards previously and it wouldn't hold pressure. At this point, everything is new except the frame to axle hose. Correct, but I was only measuring for pressure when line bypassed, not flow via volume from bleeding. Agreed 100% I'm running an old school Mico. It could be...
  20. chuzie

    500psi T-Bird Calipers

    FAIL! Still have 500 psi or less at the caliper. Still doesn't stop well. I just don't get it y'all. One thing I did notice, before I tossed my tools across the shop, is with the line lock engaged and measuring pressure at the caliper, I can achieve 2000+psi with multiple pumps of the pedal and...
Top