• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. chuzie

    500psi T-Bird Calipers

    They weren't DIY. Bought em from one of the major vendors like 200 years ago. Even have the fancy clear plastic coating encasing the braided.
  2. chuzie

    500psi T-Bird Calipers

    Absolutely positive. Both banjo and banjo bolt have a groove and the bolt hole falls in the center of the assembly so I don't think it is getting blocked. Fedex arrives tomorrow with Duffs kit. 🙏
  3. chuzie

    500psi T-Bird Calipers

    One man band, so no. Expansion is my current theory at this point though.
  4. chuzie

    500psi T-Bird Calipers

    I've been pondering the issue as I await arrival of calipers and hoses. Is it possible the banjo bolts are wrong? Defective banjo fittings? During the flow testing, I raised an eyebrow at how small the hole (fluid supply, not bolt hole) in the banjo fitting appeared to be. Does anyone have any...
  5. chuzie

    500psi T-Bird Calipers

    Nope. That's how mine typically rest on the knuckle with my crazy caster. I took one off and rotated it 90 degrees clockwise to what's showing in your picture with the bleeder to the sky. Didn't make a lick of difference and looking at the picture of a clean caliper instead of one covered in...
  6. chuzie

    500psi T-Bird Calipers

    My thoughts exactly! Hold up, you're making brake hoses without a crimping setup!? What is this magic of which you speak? Please enlighten me as I'd love to jump on board. Details! I've used the twist on stuff for steering lines, but brakes!?
  7. chuzie

    500psi T-Bird Calipers

    Any benefit to 7/16 vs 3/8 fitting? 7/16 has to be adapted anyhow so, with my 77, I may as well remake the hard lines to 3/8, no? ID is the same.
  8. chuzie

    500psi T-Bird Calipers

    I stand corrected, there are 3/8 - 7/16 adapters on the caliper hoses. Snuck out there early this morning. Air flows unrestricted from one end to the other, eliminating possibility of obstruction in the lines. Suspects remaining, - Hose expansion - Bad calipers - Bad pads As stated...
  9. chuzie

    500psi T-Bird Calipers

    Actually, I thought I researched that it was rear port to front brakes. Certainly possible, but do you have anything I can reference to confirm? I can call CPP as well. Will add it to list for Monday. Absolutely! Adjustable prop is in full effect to keep them from locking up. I manually...
  10. chuzie

    500psi T-Bird Calipers

    Oh man couldn't even begin to guess who or when. I'll tell you this problem has been present since then, so it's possible! Flow test in a couple days
  11. chuzie

    500psi T-Bird Calipers

    Braided stainless set. Bought from a Bronco vendor years and years ago.
  12. chuzie

    500psi T-Bird Calipers

    Only adapters are on the MC ports. 2500psi That's what I just measured at the tee above the differential with both hard lines going to the calipers removed, one side plugged and other side gauged. This eliminates everything but: - Hard lines from tee to caliper flex lines - Caliper flex...
  13. chuzie

    500psi T-Bird Calipers

    I haven't, but the thought crossed my mind. I may disconnect both calipers and their associated soft lines first. If I get full MC pressure, I'm just gonna toss the lines and calipers and start fresh. If not, I'll move up system to the frame-axle soft line and do the same. If that doesn't yield...
  14. chuzie

    500psi T-Bird Calipers

    I was measuring AFTER the flex to the axle but BEFORE the flex to the caliper (tee above differential). I initially wondered where the PSI went too, but then realized it was likely being absorbed by the other caliper/flex line since it wasn't capped off during the measurement. Willing to bet if...
  15. chuzie

    500psi T-Bird Calipers

    Would be nice if I had a way to put my gauge on the banjo end of the flex line. That would make quick work to identify ballooning of the line or point directly to the caliper.
  16. chuzie

    500psi T-Bird Calipers

    Did a leak down on the MC with and without assist applied with no pressure loss after 30 seconds. Bleeding accomplished as instructed, no change Same - 500psi @ caliper Here are the average numbers from 5 pumps to each corner and the line lock in cubic inches. Keep in mind this isn't going to...
  17. chuzie

    500psi T-Bird Calipers

    This ^^^ Yes
  18. chuzie

    500psi T-Bird Calipers

    Nothing for the fronts other than a hydraulic line lock but the 1500 psi was downstream of that device. I don't think I'm getting that much. First thing tomorrow. Thank you very much
  19. chuzie

    500psi T-Bird Calipers

    Just like in the picture. Rested on top rotor with wood in caliper. No, hard lines from MC to hydraulic line lock then down to the junction on the frame and braided line to the junction atop diff. Nope Definitely unimpressive volume. Takes a good 10 cycles + to fill up one of those tiny...
  20. chuzie

    500psi T-Bird Calipers

    Trying to troubleshoot the T-Bird calipers on my 77. They SUCK, but why? Running T-Bird up front, Explorer discs in back, 1-1/8 MC and WH Hydroboost. 2500 psi @ MC 1500 psi @ transition from hard line to caliper flex with one caliper disconnected. (note this it not at the tee above the diff...
Top