Search results

Sweet. That is what I was looking for. Thanks.

I have noticed my front corner has started to sag. I checked under the hood and found my front body/fender mount ( metal bracket- not bushing) is completely destroyed and causing the whole front corner to sag ( including the grill and fender). I was wondering if anybody has had the same problem...

From how it was explained to me, negative means the center line is more towards the back. The measurement is in mm. 24 mm in one inch. -6 mm is 1/4in. Tire sticks out a 1/4in more from the hub.

They are ultra wheels. 16x8. -6 offset(1/4in). I'm very happy with them. Found them online and ordered them through discount. They had the best price I could find. Found on ultrawheels.com

Definatly a bad flasher. Bad ground would also cause probs with the hazards

Matt I figured I wouldn't be able to get away with this if I was planning to use this as a crawler. I'm building this one as more of a street/hunting vehicle. I have other toys for crawling and I can't bring myself to beat this one up that much. I'm just going to do some minor cutting and add...

Did it. 35 x 12.5 bfg a/t on 16x8 in wheels with 3.5 in wild horses lift. Minimal rubbing at full lockout. No problems. Still going to cut front fenders.

Did it. 35 x 12.5 bfg a/t on 16x8 in wheels (-6 offset) with 3.5 in wild horses lift. Minimal rubbing at full lockout. No problems. Still going to cut front fenders.

Thx everybody. I'll give this stuff a try.

I measured from multiple points with the same result. I'll check the body mounts but I'm pretty sure they are good

And yes the c bushing are on right.

Installed new 3.5 in wild horses lift. I now have 1.5 in lean in front drivers side and 1 in lean in rear. Did the whole bronco lean fix that is on wild horses website about 4 times now. They start a passenger side lean is most common. I have the opposite. I noticed my axle was sticking out a...

Thanks....

Have any of you used wheel spacers? As much as I don't want to, I might. I'm having a hard time finding a wheel that I love with the right offset. Any feed back will be appreciated. Thanks

Looking to fuel inject my 302. Anybody know of any good kits out there?

That's all I can find. 16s and 17s.

Been talking to a lot of people. Most are saying minimum 4.11 max 4.56. Prob going to try 4.56 and see how it works. I can always use a little extra torque with the 3 speed.

Thank you

I had a 73 with 302 and c4 tranny. Going to be running 35s. I'm assuming the gears are original ( not that much torque and bad mileage). I was thinking of 4.11. I was wondering what anybody else would suggest. Thanks

Crawdad- Does 3.5" mean half inch off center? Sorry for the dumb question but I have talked to a lot of people and they all explain it differently.