• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. 7

    how much?

    agree with Stallion and would add that you have to love and know EB's to appreciate them. I have had a ton of people stop to look at my Bronco when I have it out of the garage and they have no idea what it is. Its like anything that is collectable, if your not into it, then you don't see the...
  2. P1010036

    P1010036

  3. 2005

    2005

  4. 2003

    2003

    Just got her back from Alabama. Long drive to KC with a leaking exhaust, no floarboards and no pass. side window, but she made it the whole way without a problem!
  5. 2003

    2003

    blasted with Starblast
  6. 5.0 EFI

    5.0 EFI

    Out of an 89 Mustang GT with 65k. Matched with the A9L brain.
  7. P1010029

    P1010029

  8. 7

    3.8L AOD Flexplate question

    oh and email BroncoBowsher, I think I saw that he is running an AOD from a mid nineties Mustang in his, so he probably knows the flexplate issue.
  9. 7

    3.8L AOD Flexplate question

    what? If I understand your question right, you are putting an AOD from a 3.8 behind your stock 302? For starters, I assume you are talking about a flex plate instead of a flywheel? The flex plate needs to have the right balance and I know for my EFI conversion, the stock flywheel was not...
  10. 7

    Which Master Cylinder

    Hi guys, quick question here. I just got a power brake set-up from a 77 EB for my 72. I don't have the money yet to switch to disc brakes, so I am going to run with the drums for a while. I'm going to replace the master cylinder, but am not sure what to go get. Do I replace it with a master...
  11. 7

    Pulling Mustang MAF harness

    saddle up is correct. The main harness has two large plugs by the rear of the intake that will un-plug. This allows you to pull the motor and the injector harness remains with the motor. Not sure what the black box is, but its not something you need. Grab Probts book on 89-93 ford fuel...
  12. 7

    Need To Replace My Engine...

    Time to Go EFI Swap to EFI. It may take some searching, but you can find someone with a wrecked 89-93 mustang. I finally found one at a u-pull it yard. Grab the whole thing with wiring and the comp. Easy swap, wiring diagrams can be found from various folks on here. No distributor swaps or...
  13. 7

    Roll-Cage Specs Anyone?

    Anyone have any specs for a roll cage? I am getting ready to build one for my 72 and could use some assistance on the measurements/angles. I plan on building a 4-6 point cage. Thanks Adam
  14. 7

    Scout power steering

    I have a couple of mid 70's Scout II's and noticed that the power steering box is identical to the early bronco except for the 3 hole bolt pattern (the scout has the 2 holes on the opposite side) I tapped my 72 Bronco for the 2 new holes and welded up a support bracket for added stength and she...
  15. 7

    EFI computer choices.

    EFI Computer Choices The A9L is the more agressive and has a better processor. I am running the A9L and it is great.
  16. 7

    Scout Dana 44 in an EB?

    ANyone tried swapping a scout dana 44 front axle in an EB? What problems will you run into?
  17. 72 EFI

    72 EFI

Top