Search results

Subject says it all...I realize the Ford and Dana carriers are totally different designs...but can't that be overcome (ignorance showing)? I'd love to have a CABLE operated locker for my 9", no electricity or pneumatics to mess with. I have a soft locker, but that can get squirrelie on...

Diesel swap?...head here for lots of good gouge. www.4btswaps.com help's you research tranny options and engine set-ups. Good bunch of guys trying to do small displacement diesel swaps. BUT PLEASE, register first and read the stickys, you'll learn a ton and the reduntant questions will be...

On Dove Bid read about "proxy bid" as RANCIL suggested. You enter the max amount you are willing to pay, lets say $1500, if other bidders stop at $1000, then the "proxy" automatically ups your bid (don't know what the increments are. Probably set by you.) If your proxy bid is $1050 and no one...

My manuals are in storage right now, If you are talking about ON the TRANNY, not the block, it's either a neutral safety switch or more likely the backup light switch. No temp sensor on a ford 3.03 manual 3 speed, or any other manual tranny, unless owner installed. If it's on the BLOCK then...

23, if you have a GM tranny you can still go with the O.D. I described. AA can set it up to go with any combo. You can keep the cummins to GM adapter and the GM B/H, flywheel & clutch. Then have the Ranger box configured for GM on the input (B/H side) and then NP435 on the output side. It'll...

23fire fly: just re-read this post, I see that you also have a 69 EB w/ a NP435. same drivetrain I have. You didn't mention what tranny the engine had/has now (auto, manual, ford, GM). After LOTS of searching on whether to find Dodge NV4500 adapter (cummins' has an adapter that mates the block...

Guys, Go Here www.4btswaps.com relatively new site with lots of tech and parts info for what you have in mind. NOTE: take the time to SEARCH & READ first. This will help you understand the basics and get you more accurate answers to any questions that you couldn't research... Great Folks, hope...

Blazin Chuck: I don't have the Bronco bulb chart handy (what style bulb goes where), but I have found many sources googling "LED" lights. I personally am going to run ALL LED's (dash,tail,markers...) after a little research. LED's cast light more directionally than incandescent bulbs, so the...

No takers? someone must be running a hydraulic master/slave clutch. (I have read the tech article)

I'm finally gathering pieces for my Cummins 4BTA swap. The donor engine came with a ford bell housing and a external slave cylinder (sweet!). Of course it's junk, so I'm looking at circle track suppliers for their master/slave cyl. combinations. I figure no more plastic components and lines that...

I'm finally gathering pieces for my Cummins 4BTA swap. The donor engine came with a ford bell housing and a external slave cylinder (sweet!). Of course it's junk, so I'm looking at circle track suppliers for their master/slave cyl. combinations. I figure no more plastic components and lines that...

I've been looking for these lights for a long time. I ditto the notion of repo's with uniform LED lighting. Wish I had the knowledge to design, cast and produce these myself, I'm sure there are plenty of folks that would like to install or replace their existing pieces.

i answered my own question...looking forward to meeting you all online ;)

Just want to see if I can post?