Search results

All my geometry is perfect with the added weight of the 4bt the welds on the track bar broke:o

4bt update/ full width axles yea i didnt really want to advertise it to much it was my first 2 minutes in the truck with my dad and once i hit death wobble at about thirty i lost control and wwent up on the imbankment and rolled upside down no roll bar or anything it is truly a blessing that...

tito your builds are awsome i am going to go with full width and keep them that way i have a 4bt in my bronco and rolled it because of death wobble it is my daily driver. I am just going to find a d44 with weld on cups in stead of cast i already have extended radius arms

I found a set of axles that i want to buy a dana 44 full width and a ford 9 full width the wedges on the d 44 are cast what mods need to be done for me to put it under my bronco also what needs to be done to the ford 9 to put it under the bronco i figured i would just cut the leaf spring mounts...

Very Very beutiful work keep it up I am almost done with my beast http://youtube.com/watch?v=0tcsEa5_s_8

Thank you i want to get my bronco on the road just need to get the hydroboost working

So I got my 4bt bronco running and am having some hydroboost problems everything is hooked up I am almost positive. The bigger port is hooked to the power sttering pump and the smaller port is hooked to the powersteering box and the return lines are hooked up right aswell. When i start the...

I bought it off ebay its a universal one from novak industries

I have almost finished my 4bt check out the video http://youtube.com/watch?v=0tcsEa5_s_8 I also have some questions about my hydroboost i fire the 4bt up and it takes the lines on the hydroboost about 2 mins to get boiling all the lines are hooked up correctly i am positive but the brake pedal...

I just installed hydroboost brakes i have a 1966 halfcab and use to have manual single resivor drum brakes before the brake switch ran off the resivor (I THINK TWO GREEN WIRES OFF BRAKE SWITCH ON SINGLE RESIVOR) but i just installed a brake switch to the pedal so do i install those wires off the...

I just installed hydro boost brakes and am working on the brake switch can someone show me where to locate the brake switch and maybe give me step by step directions or pics would be very helpful thanks again

I have a zf tranny hooked to a np 205 is the tranny mount enough to hold them both up in the truck or what kind of mount should i use on the np 205 ic a lot of guys making craddles but dont c what they are bolting them to

will the center of the shaft wobble to much or will it be pretty stable

I have a 4 1/2 inch suspension lift and a 1 inch body lift could that be why the angle doesnt match up if so what can i do to make it work

Does anyone have any pictures or tips to installing the f100 box with the yoke the shaft on my 66 bronco doesnt seem to be low enough to attach i cut the shaft but it still doesnt seem rightany pics or comments would be appreciated:-[

Will a hydroboost work upside down a long as the master cylinder is right side up.:-[

I am installing an f100 power steering box easy and i just put togeather my spicer yokes from wild horses what do i have to do to instal tehm on teh steering shaft how do i get the old sleeve off with the pin through it. its on a 1966 steering shaft that had manual steering any input would be...

I am installing an f100 power steering box easy and i just put togeather my spicer yokes from wild horses what do i have to do to instal tehm on teh steering shaft how do i get the old sleeve off with the pin through it. its on a 1966 steering shaft that had manual steering any input would be...

How do i attach the clutch pedal to the master cylinder for the zf?

I am about to start my 4bt swap would it be easerier just to take the whole body off or keep it on i am also installing a 1 inch body lift and doing a zf/np 205 swap i plan on doing this swap in about 2 weeks because i have every single part ready to go how much longer would it take to get the...