Search results

What is the best way to center rear axle. What is the measurement from leaf to leaf. (Axle perch to axle perch Inner dieameter).

thats a great idea yea it is a dana 44

Ok so I am going to do a front sway bar but i have a lift and full width axles. I rewelded my C's to stock location so would a stock 66 bronco sway bar work with mild modification I am going to go with the one they sell on summit just curious if it will still work with lift and full width axles.

What is the magic number when setting the castor angle I am almost ready to weld my axle wedges for my full width swap after I set the castor angle How do i decide on witch bushings to use.

Today i was working on my ball joints pretty simple project when i was removing the upper ball joints on both sides there was no snap ring is that correct should there not be a snap ring on the upper ball joint only the lower?

So i got a dana 44 today out of a 1972 f 100 and the wedges are weld on and are 36 inches apart just like my dana 30. My question is do the wedges need to be cut and rewelded in another spot seems like every thing will be center to me please correct me if i am wrong.

I bought a ford 9 out of a 78 bronco today that has 3.73 gears and my stock ford nine has 4.11 i want to keep the 4.11 are the two axles compatible can i Just put the whole carrier or just the ring and pinion in the the full width axle or do i need a differant set up thanks for all the help.

How wide are full width axles i didnt do any measuring just picked up a dana 60 with posi thought it was full width and it is 1 inch bigger than my stock 9 I am trying to get my axle swap done this week so if anyone knows what axles will be good please post. Also if anyone wants to buy a posi...

I might be picking up an axle tomorrow if it will work it is a ford 9 axle out of a 70's f100 2wd it is full width but is there in differance in the 2wd and 4wd ford 9 full width or just the gear ratio going to pick up tomorrow for 100$ if it will work thanks. Ps the axle is 65.5" wms to wms...

I am looking for leaf spring brackets for my full width axle swap where are most of you guys buying them from

Great progress looks better and better I also agree youll like the argon mix its like night and day not splatter at all keep up the good work

I got mine for 1800 and sold some accesories off it for around 300 the trans was 400;D the transfer case was 100 plus another hundred to twinstick and put all new gaskets and then misc stuff around 1000 radiator hoses all the unexpected stuff. Had a lot of fun building i would recoment set away...

What would be the down side of making radius arms out of DOM tubing with rod ends and spaceres do away with the c bushings. I probally sound like a total noob but just wondering. I am doing that setup in my rear to stop the axle wrap from the torque of my 4bt.

4bt cummins turbo diesel

Me and my dad and fred flinstone

I found a full width 44 out of a later model bronco but it has cast wedges and not weld on what is the negative to that i know that the coild springs will bow a little but couldnt i just move the coild plate over a little. I have WH extended radius arms right now will those work i notice a lot...

I am just going a head and doing full width axles and stone crusher steering more for comfort then anything how do Measure what C bushings i need

haha ya thanks for the insight on the trac bar braking it wasnt my fault i dont think%) yea i was out in livermoore with the six in it in febuary if your in the bay area I would love for you to come by and check out the current diesel

I have 4 inch straight exhaust I dont think headers are going to be the issue lol;D

I was wondering the same