Search results

I'll jump in. What do I have to lose?

Drove it!!!8-) Put about 20 miles on it after the tranny and t-case rebuild and power steering install. It was down for almost three months, way too long.

The mounts are clean and well grounded. I can jump across the relay connector and sound the horn. Here is a pic of the horn button, the center blade is connected to the wire coming off the horn "pad" that came with the wheel. The other blade is grounded to the spacer. Is that correct?

The horn did work when I hooked everything up. The wiring is stock and I just put in a used column, I check all the wiring on the column and it was in great shape. The relay was clicking and the horn blew until it just quit and then I found that there was 12v on the ground side of the relay. Now...

Those are both projects but there are some pictures in my cardomain page. The Mustang was a field car left out to pasture for 17 years. The Impala was a barn car tucked away back in '72, major project but it was free!:D

I started a few projects about 3 months ago mainly to install power steering. My Bronco originally had power steering but it got robbed somewhere during its life. I figured while it was down for the power steering install, I would pull the tranny and t-case for a rebuild. My friend did the...

I put a new relay in and had my horn working and when I drove it yesterday, the horn quit. I checked the connection at the steering wheel and instead of continuity to ground, I had 12 volts. And when I checked the relay, I was getting 12 volts on the ground side. Can the relay go that quickly...

Awesome, you guys are great. I was just at NAPA yesterday and couldnt find them. Now that I have the part number, it should be a breeze. Thanks guys8-)

Does anyone make the front turn signal pigtail? On the wiring harness side that is. My left run signal has a broken connector inside the weathertight connection and I can't find one to splice in. I did find one close at pullapart but it was a three wire connector. Any suggestions?

I have a stock power steering setup and my low pressure hose need replacing. Is this a special hydraulic hose or can I pick it up at the local parts store? This is about the last thing on my power steering conversion/addition so I am anxious to get this finished up and back on the road. Thanks...

How much for the backing plates? Shipped to Alabama 36067. Thanks

Anybody got one?? I found this pic from Landshark's build, I need the bracket and collar around the steering column, somebody has to have one laying around that they dont need;D

I need the firewall support bracket for the steering column on my 75, the one on the engine side. I need both pieces, the triangular piece and the collar that goes on top. If anyone has one please let me know. Not sure if it makes a difference but this is for a power steering column. Thanks.

That has the same contour on the quarter as this 67 http://classicbroncos.com/forums/showthread.php?t=223300

Saw it roll through my neighborhood but couldn't run it down. ;D Is it anyone here?

Thanks for the input guys. AZ73, thanks for the pics, I think I can see where the cooler mounts.

I just added a main tank on my 75. Yes, I have been running on the aux tank but I dont drive it any real distances. The nylon fuel lines are still in place running up to the selector valve, just a little short. Does anyone still use the nylon fuel lines or just bend up some hard lines? If the...

Cool stories and great pics, keep them comin' BTW, what wheels are those on your Bronco, they look great!

Was the Browning double groove pulley a stock piece?

What power steering pump do I have? I have a cracked pulley and need a new one, it was a browning pulley dual groove. Here is a link to a few pictures of the pump. Is it a saginaw or Ford? What pulley do I need? http://www.cardomain.com/gallery/16193496...