Search results

Brand new, out of the box Coyote... you could call Scoggin Dickey. https://sdparts.com/p-30678-searchv1.html?q=coyote+5.0&facet-categories=1029419&page=1 I agree with Broncobowsher on the trans. I'd skip the 4R70W and go for the 6R80 or 10R80. I'm not sure why T.R.S. would consider a GM...

Bringing this thread back up. Any updates on the production of this tank? I hope it's not dead in the water.

I love that! The slotted wheels look amazing!

We’re they older installations? I installed mine ~18 months ago. The installation docs (dated 6/27/18) call for redline (plus, that’s what AA shipped with it).

For the folks running an Atlas 2 transfer case.... Advance adapters recommends only Redline full synthetic, 75W-90 API GL-4 Redline says it's safe for brass synchro's, as it lacks the sulphurs found in most GL-5, so I can't imagine it not being ok for the Dana 20 as well. Hang on to your...

If you’re getting the control pack from Ford, it comes with wiring info / instructions.

@tripleJs15 My experience is the same at rcmbronc's. Gen 2 coyote, 6R80 trans, Ford control pack. Neutral safety switch is integral to the transmission, and as long as you're using the control pack for your starting circuit, it works. Reverse lights however are a different story. I ended up...

2"

My ABSOLUTE favorite thing(s), are the comments I get from random people. Things such as... "I've always been a die hard Chevy / Jeep / Dodge / Etc guy, but that Bronco is just cool"! or "I've always hated Fords, but I'll make an exception for that". 😂

Ordered a couple as well. Thanks Jon!!!

A buddy of mine just got his today too. Dec 13th. His is a 4 door badsquatch

Any new updates Tom? Thanks again

Hey Hunter1. Nice write up. I thought about doing something similar when I built my HB relocation setup (using the shaft itself as a pivoting element). The main concern I had/have is the shear loads that the 5/16" pin would be placed under. It may be totally fine, I just never went through...

I used this flasher. https://www.superbrightleds.com/moreinfo/flashers-load-resistors/fl2-red-led-bulb-electronic-flasher/779/833/?utm_source=product_review_email&utm_medium=email&utm_campaign=product_review_email I remember reading the same thing about pin polarity that huddy51 mentioned...

Ironically, the easiest time I've had with TSA is when traveling with firearms. :D If you follow their rules, they are extremely helpful and accommodating. On the other hand... my regular checked bag seems to get randomly inspected every... damn... time... and I've had some items NOT make it...

What style of exhaust? I have a 2 into 1 setup, and run one pipe above the torque tamer crossmember, and the other pipe below the crossmember. I had to dimple both pipes a little to clear it. Regarding your second question.. I would probably move the crossmember back 1”.

My local ranch store has a nut and bolt section that includes a bunch of smaller bins above that contain a bunch of odds and ends. I found a plastic push in bushing that was a perfect fit on the o.d., and pretty close on the i.d. Close enough that you'd really never know it wasn't factory.

I believe that Power by the Hour can help with a godzilla control pack. I also don't understand why Ford would sell the crate engine but not have a control pack available for it...???

Leno's Bronco has the 5.2 predator from the GT500 mustang.

I have a black fantom electric fan that fits this radiator. If whomever buys it is interested, shoot me a private message. It has virtually no use on it.