• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. jcwalsh1

    Can't wait for this weekend!!!

    Please wear goggles when pulling the tank. I pulled both tanks and the axle off last weekend and had no idea how much crap(dirt, sand, rocks, you name it) was stuck above and around the tanks. Both tanks are getting boiled, all new lines and pump. The axle is getting new u-joints and CV...
  2. jcwalsh1

    Cheap Spicer U-joint

    These fit the rear axle.
  3. jcwalsh1

    Cheap Spicer U-joint

    I just bought 5 U-joints from this guy for $8.50 ea. rodepew@earthlink.net He said he has about 50 left. Jeff
  4. jcwalsh1

    Paint gun recommendations???

    The Devilbiss Finishline has been reccommended in several other posts. They are going for about $100 on e-bay. I am currently leaning in this direction. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2453072215&category=43987 Jeff
  5. jcwalsh1

    Tired about people bitchin about e bay?

    E-bay Ebay is one of the best places to find parts for doing a restoration. I could never have completed my motorcycle without it. Now I have started on the Bronco and feel the same way. Before I buy almost anything I will see if it is available on e-bay. Rule #1 - Know the value of what...
  6. jcwalsh1

    WASTE of a bronco

    This would not give me a warm and fuzzy. "EXTERIOR Excellent Exterior Condition Glossy, Original Paint No Visible Rust " Is it invisible rust?
  7. jcwalsh1

    spicer vs borg warner...

    Has anyone used these? Spicer LIFE - The newest cardan universal joint in the Spicer product line offers advanced design features for longer life and superior performance. Bearing cups are case hardened through a carburizing heat treat process, and the inside diameter and thrust washer...
  8. jcwalsh1

    Seat covers

    The early Mustang seats were the same as the EB. I plan on buying from this guy. I was told they make nice stuff. Give them a call. Jeff Mustang Market
  9. jcwalsh1

    spicer vs borg warner...

    I recently asked the same question. Depending on how you interpret it those could be on the outside or on the inside. The only thing I got was that the Borg Warner were on the 66-71 and everything later was Spicer. Jeff
  10. jcwalsh1

    what should i do with my tank

    Take them both off and have a radiator shop boil them out for you. Replace as much of the fuel lines as you can and put in a new fuel pump. If you are dropping one tank already you might as well get it all done with one shot. Otherwise you might be trouble shooting the fuel system for a...
  11. jcwalsh1

    speaker box

    Center speakers Here is what I did. Two 6" speakers. The box has a center divider and is made from 5/8 ply. The carpet was $5 at home depot. Total cost for the box was less than $10 and the time it took. The angle of the speakers gives some stereo effect. Jeff
  12. jcwalsh1

    U-Joints - Spicer or Borg

    How do you know if you have Spicer or Borg Warner axle U-joints? I believe they are stock 75. Jeff
  13. jcwalsh1

    Been Busy Tonight

    Looks great. What spray/compressor setup did you use? Jeff
  14. jcwalsh1

    2004 CB Calendars now available!

    It has arrived callendar arrived yesterday. Looks great.
  15. jcwalsh1

    Chrome Light Ring Mod'ing?

    Find a local chrome shop. They will strip them and give them a nice new coat of chrome. I would not pay more than 40-50 for both. 1/2 price of new chrome and I bet you get a nicer product.
  16. jcwalsh1

    Door Guts

    Try a little WD40 first. I had the same problem and it did wonders. Roll the window up and take the door panel off. Spray, jiggle, spray. Worked for me.
  17. jcwalsh1

    Anybody else have a problem with K&N?

    I have run K&Ns on my bikes for years with no problems. I have never heard of the shrinkage issue. Did they ever explain why it happens?
  18. jcwalsh1

    Best Bronco Mechanic

    What part of the Chicago area do you live in? Jeff
  19. jcwalsh1

    C4 slippin between 1st & 2nd

    Well, I was stuck in traffic(Stop and go) for about 2 hours last night and the tranny started to slip between 1 & 2. Am I doomed or is there anything I can do to increase the lifespan? Jeff
  20. jcwalsh1

    Insane 4wheeling - Or just plain stupid?

    Lost the rear axle? Welding in a 3' pit of frozen mud. Yeah, that sounds like fun.
Top