Search results

I got tired of working under the tub, so I braced it, built a fixture to mount to my rafters and hoisted the tub off. This will speed up my build and make life easier. Amazing what you can do in a two car garage!

What about your upside down one from a few years ago!

Since you are moving the axle forward, you can move the PS box back and run the pitman forward. This way no mods needed to the box. I am building mine this way right now and check out Danwheelers 3 link build thread. He did the same thing.

This could be fixed up to be a nice top or run as is for a trail top. All glass is good. The rust looks worse then it is. A wire wheel and a thin coat of filler is all the rust under the drip rail needs. The drip rail is solid. Back corner on the drivers side has a little tear that needs to be...

He had it up for sale on North West Classic Broncos a few months ago. Said he was moving to Peru.

I went to bare metal using a wire wheel, then used an etching primer. Raptor lays down very nice. The farther you are away the rougher it gets. shoot a piece of scrap steel first to figure out how far you want to be away for your taste.

Working on it right now. Got some of your brackets and heims used in my front 3 link and will order your rear 4 link kit in the near future. I would recommend offering a zero degree option on the upper control arm brackets. There is not enough room to do 10 degrees on an EB in the front. I...

Nope not me. I am going to try and use lock washers on my links. I got some beefy ones.

Dan have you given thought to abandoning the Astro hydroboost and going with a Superduty Hydroboost? Loco and EFI are both running them and you can usually find a superduty on CL being parted locally.

Any thoughts on recessing the filler neck in to the body? Looking at the existing war wounds on your upper quarters the filler neck is going to take a beating.

I'll look tomorrow when I get home. I got two glove boxes and am using neither.

I will be ordering the Ruffstuff 7/8-18 inserts in the next week if you want to see how much slop theirs have before welding.

Still available and will ship.

Hey Dan, if you don't mind one of these days I want to swing by and check out your 3 link in person. It's looking good8-)

I had jack stand envy, but didn't want to spend the coin. I ended up building my own chassis stands on casters.

Cheapest I found was e-taps. They have the left hand for $45 http://search.freefind.com/find.html?id=73053582&pid=r&mode=ALL&n=0&query=7%2F8-18

If you have room thread a die on before you cut the stud and then as you take the die off it will clean up the threads.

Helper springs. http://www.truechoice.com/prodinfo.asp?number=EIB%20HELP

Price drop to $1000. I also have a flex plate for a 5.0 that will go with it.