Search results

I’ve got some leftover parts from rebuilding and swapping axles. This stuff isn’t any use to me, but if you can use it make an offer and come get it. Dana 30, 3.50 factory limited slip, trac bar and tie rod. I've got the drum brake parts somewhere to go with it but no locking hubs Dana 44...

I’m looking for a passenger side seat frame, just the seat back part for a 68-77 style seat. I bought a set of seat frames and got one 68-77 style seat frame and one 66-67 style seat frame. The bottoms are identical so just a new seat back frame on the passenger side is all I need. Just let...

I believe the outer bearing is the same interference fit as the inner bearing. I rebuilt my rear end earlier this week and i had bought the solid spacer kit to go in it but i shy'd away from it because i didn't want to keep pressing the bearing on and off. Ended up just using the crush sleeve

I could get you halfway there. I bought a set of seat frames and got one early and one late style. I would gladly trade you if you're interested in the early one.

Never used them for anything personally, but I've seen a 68 mustang convertible they restored for a guy. I don't know how much the restoration cost, or how much work they actually had to do to it, but I wouldn't consider the end result very top notch. That was a while ago and I don't remember...

Sorry man, I already bought some off another guy on here I appreciate the reply though

I’m looking for a pair of the posts that go from the hardtop down into the taillight panels Thanks Jacob

Still looking, willing to pay shipping. I'm just trying to get my bronco on the road

Sent you a PM

No experience with the Eastwood, but I used the harbor freight system to do my wheels. Worked pretty good once I got the hang of it. They've held up good so far, what little I've driven it

Still looking for a set of these if anyone's got some

If you're talking about Carquest, they got me the right bearings and seals on my 69 the first try. Might try looking under a couple different years, I've noticed some of their parts don't always show up in the right year. Sure is a small world, didn't think I'd see anybody else from iuka on here

I'm looking for a pair of stock bucket seats. They don't have to be in great shape, I'm just looking for something usable until it comes time to redo my interior. Just let me know what you've got. Thanks, Jacob

If you've got the transfer case unit to go with it, I'd be interested in it. I'm just an hour north of you in Iuka

I know its hard to see here, but the one on the bottom is the one I really need.

Can you get us some pictures of everything down in there? I'm assuming you took the top off of it to look for the bearings. Having the bearings fall out was definitely the most likely scenario, and that could still be the case. One of them could have fallen down and is now lodged in front of...

I need the linkage rod that runs from the steering column down to the trans for 1st and reverse on a 3 speed column shift. I was trying to adjust mine today and i ended up twisting the whole threaded part off of it trying to get the peg piece to turn. Thanks, Jacob

I'm pretty sure your gears are just not meshing, i had the same problem when i took my trans out. Those needle bearings are closer to a 1/2", so if the whole output shaft hasn't shifted that far then they shouldn't have been able to drop out. You might be able to just wiggle the input and...

Hey guys, I'm needing to buy a dana 44 so i can get rid of my dana 30. I'm mainly looking for one with drum brakes cause i have all the disk brake conversion parts already, but I'm having trouble finding anything at all. Thanks in advance Jacob

Do you know anything about the axle ratios on the 77? I might be interested in it.