Search results

Pictures Hope this helps. shaun1300

I had a bunch of broken/corroded headlight grounds. Bought the LMC headlight harness (similar to one in this thread) and had bright headlights in 5 minutes. Simple install. It took a little longer to permanently route harness and tie rap. LMC price $29, the one for $18 in other reply is probably...

shifting 4x4 Mine is hard to shift also. I've found being on flat level surface helps. I suppose it takes load off axles, rolling a little also helps. shaun1300

Answers They didn't come with 44 & discs. Previous owner installed them along with 302. 1st owner worked @ Ford stamping plant in Buffalo and changed things over the years. Diver side rear quarter panel has dual opening gas doors which were only on 1977 (see pix above). I think he had a later...

rocco, I hadn't really considered using as a trail vehicle, but I think these pictures will give you an idea on body condition. I would replace inner and outer rockers on PS before I had passenger in it. They are both shot. The truck does have a new rear cargo area floor since pix were taken and...

I posted my 68 that has a lot of rust but some nice options such as Dana 44 with discs, power steering and a good running 302 replacement for original 289. Also has power steering & plow mount. It has a number of parts such as a pretty good top (few rust holes) but could be easily repaired & new...

Computer problems I am 67 and the PC is one of my hobbies. Feel free to email or pm me if I can help in future. I live outside Rochester NY which is 4 hours away from you. My wife told me the other day if we won a million dollars I couldn't buy another Bronco to swap parts with my 68. I don't...

Your pictures I don't know if the info on Photoscape helped at all, but I have learned a lot from your pictures. I'm anxious to see you project finished. I envy the bodywork skills you have. shaun1300

Picture size Try using photoscape which can be downloaded at: photoscape.org for free. Open your picture in program and click on size in edit mode and save as 1024 x 768. Since you are a contributor you can upload the pictures from your pc, just change name of file so you will know which are...

I am trying Sem Rust Mort based on your inputs and reviews on web. Haven't received it yet, I like the idea it can be sprayed from a bottle. Company I bought it from www.ditchek.com says it can be covered with regular paint. Sem also makes a product called Rust Shield that they have a hardener...

I understand what you are both saying, it appears the firewall was bashed to accomodate the fact that the v8 mounts were not moved forward as Jed mentioned the swap to v8 requires . thanks for your replies. shaun1300

68 to 66 swap questions Jed, thanks for your valuable input, I am not a welder but have friends who are. I am still practicing. As far as price, I tend to agree with you but you make a good point about cost of hauling one from south or west. I am wondering if 66 drove poorly compared to say a...

I looked at a 66 today that has been blasted and primed. It has stock 6cyl drivetrain, runs well and a lift of 3 to 4" which I would remove. My questions are based on pix of the 66. My goal if I purchase the 66 is to swap parts between it and the 68 I have (very rusty especially cowl corners)...

I ran accross this while searching for EB's for sale. Note: For sale sign says KS with no city listed but must have been in a show in Belton. you can read for sale sign in pix for info. says rust free New Mexico vehicle and # 913-341-4243 shaun1300...

Windshield latch Do you have a complete windshield latch assy that allows to to lock windshield to hood? If so how much shipped to 14514. shaun1300

Rust Mort I want to thank everyone for thier input. I am going to try the Rust Mort due to ability to spray in hard to reach areas behind dash. It may not last forever but my 68 is so bad it won't last either and would be too much $ to replace all metal needed. Photo will show you what I am...

68 Dash pix Would like a picture of 68 dash and shipping to 14514. Does it include gauge cluster/speedo? Thanx, shaun1300

I am in the process of fixing my upper steering wheel mount that rusted away. I had to pull dash mostly out to get at brackett. There is a lot of rust that I would like to slow down while I can get it. I don't expect it to last for ever just long enough so the EB can be a daily beater when...

Bell housing bolts They are 7/16 x 14 and I believe length is 2 1/2". I looked them up on net to use on my Mustang HO on engine stand. I did not count how many are needed. shaun1300 QUOTE=zerostar2410;1625999]Lost my bolts to bellhousing. Anybody know the sizes and locations (if different...

Water wetter review I realize you were asking about Purple Ice, but I thought you might find this test of Water Wetter interesting. Doesn't seem to lower overall temp alot but seems to lower head temp enough to be worthwhile. I have used it in a X1/9 and my Porsche and think it helped. X1/9...