• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

1/2 cab rollcage build almost done

spennyluv

Jr. Member
Joined
Dec 8, 2005
Messages
88
Loc.
bay area
I had complete offroad send me there 1/2 cab cage just the front and rear bend and then I did everything else myself turned out pretty sweet decided to go all out after my accident.:eek: The cage is 2 1/2 by 1/8 steel and then 1x2 chanel.

385.jpg

2007_spring-summer_239.jpg

2007_spring-summer_253.jpg


the only thing that saved my life was my 6 inch stack my dad and i both crawled out of that baby alive now I get to Rebuild it twice as good:D

( you can see my full width axles in the backround getting ready to go in this week)
 

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Looking good!
Are you going to go to 3 point or 4 point harnesses? Now would be the time to put those belts on the cage etc.
 
OP
OP
S

spennyluv

Jr. Member
Joined
Dec 8, 2005
Messages
88
Loc.
bay area
Looking good!
Are you going to go to 3 point or 4 point harnesses? Now would be the time to put those belts on the cage etc.

I have 4 point harness crow enterprise harness and am tieing it to the cage I rarly where the 4 point harness though just the lap belt if i wore my shoulder belt in my accident i would be dead forsure. Its funny because I put my shoulder belts on before i started driving and then took them off and just wore a lap belt if thats not a sign i dont know what is. Thanks for the compliment a lot of your builds and threads inspire my work
 

Bronco

Sr. Member
Joined
Mar 18, 2008
Messages
418
Loc.
Mountain View, CA
Your bronco looked nice even upside down. My mom told me to always have clean underwear on in case something happened.

Congrats on the new cage.
 

bosshoff

Sr. Member
Joined
Mar 30, 2004
Messages
726
I agree with Ugly74, I doubt anyone had clean underwear on after that.
 

fwilder

Sr. Member
Joined
Oct 25, 2005
Messages
950
Other than the obvious it doesn't look like it got too much dammage. the hood and front fenders look fine. How did that happen?
 

NYLES

Bronco Guru
Joined
Aug 13, 2004
Messages
9,846
DAMN! I have been in a BAD 2 flipper with my 88 Ranger ended up thrown through the pass window.....BUT think its time for a cage in the 69 Glass 1/2 cab...wasnt gonna but a cage in it but after seeing your pics and pretty much "0" protection.......I just added a 1/2 cab cage to the list!

THANKS!
 

TN1776

Bronco Guru
Joined
Oct 24, 2006
Messages
2,632
I remember seeing the pictures of your Bronco on the 4bt swap forum (and in person in Livermore when you still had the Ford straight 6 under the hood). You did an amazing job on that rig, and while it sucks to have to go through all of that it definitely sounds like you're bringing it back to life far better than ever. Glad you and your dad are ok, and glad the Bronco didn't go to the crusher!
 
Top