1966 Bronco 170 motor - Looking for a 9 3/8 clutch disk

[broncoray]

Have a 1966 U13 Bronco and in process of getting parts together to install drivetrain.

Was surprised the clutch disk is 9 3/8" - Bigger than all the 9" kits bronco vendors are selling.

Went looking online and found 2 "1966 Bronco Clutch Disk" Ford 9 3/8" OEM part numbers. C6TZ 7550 A - C6TZ 7550 B
was thinking a Z in the part number indicated mustang.

Maybe they are interchangeable with mustangs - but both vendors indicate no returns you buy it you keep it.

Pressure plate code is C6TA 7566 C and looks to be in good shape.

Appreciate any advice

 

[B RON CO]

Hi, visit fordsix.com. Recently one of the guys just went through this. He might have had his clutch rebuilt. I wish I knew if the 9" clutch I use could be subbed. Good luck

 

[TDubya]

I replaced the clutch in my 69 w/ 170 & 3 speed manual 5 years ago with clutch kit ZZZ-MU578-1 from Summit

 

[Broncobowsher]

I replaced the clutch in my 69 w/ 170 & 3 speed manual 5 years ago with clutch kit ZZZ-MU578-1 from Summit

If I remember right, the '67 and later for the bigger 10" clutch. The 9" is one of the '66 oddities

 

[TDubya]

If I remember right, the '67 and later for the bigger 10" clutch. The 9" is one of the '66 oddities

Gotcha

 

[okie4570]

See if there's a shop local to you and have it resurfaced. I know several that have gone that route with their 66.

 

[twodogs]

I have a 9 3/8" clutch in my '74 Bronco with a 200 inline six. When I replaced mine last year, I found a perfectly rebuilt clutch disk from Clutch Masters in Billings, MT. You might want to give them a call...(406) 256-9110. Believe me, that disk is hard to find.