carter2772
Bronco Guru
https://seattle.craigslist.org/see/cto/6217406551.html
I am selling this to fund other projects
I removed the body from the frame and disassembled everything else from the frame. Cleaned all the rust up on the frame, axles, underside of the body, then reassembled it.
-170 inline 6 rebuilt with about 10k on it. 2 barrel webber carb
- np435 transmission dana 20 with low range kit in it
-Dana 44 front 5.89 gears, chromoly shafts and u joints, disc brakes, new ball joints and bearings.
-Ford 9 inch rear. detroit locker.
Final crawl ratio is 125:1
-James duff suspension. 5.5"lift coils
-extended radius arms
- stage 2 shock hoops
-dual shocks up front
-adjustable track bar
-shackle flip rear
-Flexs really well.
-39.5x 13.5x15 Iron
- Trail Ready Beadlocks.
-4x4x2 power steering box
-6 point roll cage with corbeau seats mounted to cage
-5 point seat harnesses
-Silverback fender flares not pictured
-Front plate winch bumper
-Rear James Duff tube Bumper with tire carrier.
-PNW Bronco's rear quarter guards.
-rock Ski's.
The bronco is about 95% complete. I don't have time to spend on this Bronco anymore, and want to use the money for other projects. For the most part it needs front blinkers installed, an alignment, a windshield  (I broke it when installing it), and currently the exhaust that's on it is what was on it when I pulled the bronco apart.
I also have a set of 5 / 37" toyo mt on aluminum wheels that could go with.
Respond via email. Please leave a name and number to reply to.
Motivated to sell
Asking $8,950obo
I am selling this to fund other projects
I removed the body from the frame and disassembled everything else from the frame. Cleaned all the rust up on the frame, axles, underside of the body, then reassembled it.
-170 inline 6 rebuilt with about 10k on it. 2 barrel webber carb
- np435 transmission dana 20 with low range kit in it
-Dana 44 front 5.89 gears, chromoly shafts and u joints, disc brakes, new ball joints and bearings.
-Ford 9 inch rear. detroit locker.
Final crawl ratio is 125:1
-James duff suspension. 5.5"lift coils
-extended radius arms
- stage 2 shock hoops
-dual shocks up front
-adjustable track bar
-shackle flip rear
-Flexs really well.
-39.5x 13.5x15 Iron
- Trail Ready Beadlocks.
-4x4x2 power steering box
-6 point roll cage with corbeau seats mounted to cage
-5 point seat harnesses
-Silverback fender flares not pictured
-Front plate winch bumper
-Rear James Duff tube Bumper with tire carrier.
-PNW Bronco's rear quarter guards.
-rock Ski's.
The bronco is about 95% complete. I don't have time to spend on this Bronco anymore, and want to use the money for other projects. For the most part it needs front blinkers installed, an alignment, a windshield  (I broke it when installing it), and currently the exhaust that's on it is what was on it when I pulled the bronco apart.
I also have a set of 5 / 37" toyo mt on aluminum wheels that could go with.
Respond via email. Please leave a name and number to reply to.
Motivated to sell
Asking $8,950obo
Last edited: