• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

1968 u13

elan

Sr. Member
Joined
May 27, 2015
Messages
541
Loc.
s
If it is everything mentioned, it needs to be restored correctly or sold to someone that will do the critter justice.
 
OP
OP
69bronco351

69bronco351

New Member
Joined
Jan 6, 2020
Messages
18
Loc.
Mt. Pleasant
How do I become a contributor? No pics yet, I've spent the day gathering up everything I need to remove this Bronco safely. Had to round up a set of roller wheels and tires for it. The stock all terrains are permanently flat on the bottom and will damage the rear quarters since it's an uncut tub. Also cutting 2x4s to jig the tub at tailgate, door pillars front/rear, under the hood. I'm stuck at the VA hospital most of the day tomorrow, but will have pics no later than Friday. Will document with pics of exactly how it looked when I found it, the digging out process, jigging the tub and doors, installing the rollers and crossed fingers on the 20 mile journey back to my.house. Thank you for your patience on the pics. I did find the pic I took of the VIN/data platoon the gb door.
 
OP
OP
69bronco351

69bronco351

New Member
Joined
Jan 6, 2020
Messages
18
Loc.
Mt. Pleasant
Most definitely passing it along to a u13 fan, I can always find another parts truck. I cant handle another restoration now. Almost finished with the 66 Chevelle 98% done. 66 Fairlane GT about 75% and just picked up a 65 Vette roadster that just need the carpet/seats installed and shes done.
 

JGbronc

Contributor
Bronco Maniac
Joined
Mar 30, 2007
Messages
6,390
Loc.
Hytop, Alabama
Most definitely passing it along to a u13 fan, I can always find another parts truck. I cant handle another restoration now. Almost finished with the 66 Chevelle 98% done. 66 Fairlane GT about 75% and just picked up a 65 Vette roadster that just need the carpet/seats installed and shes done.

Your message storage is full, I tried to send another PM.

I'm seriously interested and would like a shot if I'm first in line. You can send me any pics and I'll post for you since I'm a contributor already.

Jimmy Golden
(256) 599-0272
jgolden6677@yahoo.com
 

hyghlndr

Contributor
Bronco Guru
Joined
Jan 19, 2009
Messages
5,264
Loc.
Hockessin, Delaware
Also interested, sent an earlier message. Would make a cash offer or even consider a trade deal if you wanted one already restored.
 

ford man

Contributor
Bronco Guru
Joined
Aug 31, 2008
Messages
2,366
Loc.
Leesburg Ga
I want to see some pictures of the bronco so become a contributor !I also want to see pictures of the 66 Ford fairlane GT !HURRY;D
 
OP
OP
69bronco351

69bronco351

New Member
Joined
Jan 6, 2020
Messages
18
Loc.
Mt. Pleasant
Well, I got rained out yesterday afternoon. Heading out the door now to prep it for removal, jigging the tub because I know the floor pan supports are rusted thru and I get underneath it to see the condition of the bed floor. Plus the 1/4 panels are uncut and I was surprised to see they're not rotted out, inside and out. Come hell or high water, I'm going to get this one out in one piece.
Will also verify VIN on frame to match title and warranty tag on the glovebox. For anyone interested in buying it, if theres any pics you want specifically, let me know within an hour. Once I get about 10 miles from where the U13 is, I lose my cell signal. Like I said, its WAY out there. Should be finished by 3 and will post pics then! Thx
 

JGbronc

Contributor
Bronco Maniac
Joined
Mar 30, 2007
Messages
6,390
Loc.
Hytop, Alabama
Well, I got rained out yesterday afternoon. Heading out the door now to prep it for removal, jigging the tub because I know the floor pan supports are rusted thru and I get underneath it to see the condition of the bed floor. Plus the 1/4 panels are uncut and I was surprised to see they're not rotted out, inside and out. Come hell or high water, I'm going to get this one out in one piece.
Will also verify VIN on frame to match title and warranty tag on the glovebox. For anyone interested in buying it, if theres any pics you want specifically, let me know within an hour. Once I get about 10 miles from where the U13 is, I lose my cell signal. Like I said, its WAY out there. Should be finished by 3 and will post pics then! Thx

Sent you a PM!
 
OP
OP
69bronco351

69bronco351

New Member
Joined
Jan 6, 2020
Messages
18
Loc.
Mt. Pleasant
Cant figure out how to post pics to my post, so I put them in my gallery. A ton of rust, but I'm confident I can save the tub. Ive rebuilt worse. Frame VIN, glovebox tag and title are matching. I have to believe the engine is original. Carb, intake, exhaust manifold and distributor for 1968. I should have it in my garage by Sunday, then I can use my endoscope to look inside the frame. I've had a complete floor and bed deck for years, along with front and rear door post. Plus also have inner fender aprons, inner and outer rocker panels. It's about time to fire up the plasma cutter!
 

JGbronc

Contributor
Bronco Maniac
Joined
Mar 30, 2007
Messages
6,390
Loc.
Hytop, Alabama
I'll go ahead and post some pics for you since I know everyone is wanting to see.

It looks like it's had an aftermarket soft top at some point, as those are aftermarket bows, and the riser is aftermarket also. This thing seems to be pretty original otherwise, but check out those Cobra valve covers! Cool! :cool:

Still has the surge tank and what looks like the original fuel pump.

Still definitely interested!
 

Attachments

  • IMG_2322.jpg
    IMG_2322.jpg
    186.5 KB · Views: 152
  • IMG_2320.JPG
    IMG_2320.JPG
    244.2 KB · Views: 156
  • IMG_2319.jpg
    IMG_2319.jpg
    132.3 KB · Views: 136
  • IMG_2324.jpg
    IMG_2324.jpg
    174.2 KB · Views: 149
  • IMG_2321.JPG
    IMG_2321.JPG
    102.9 KB · Views: 134
  • IMG_2323.JPG
    IMG_2323.JPG
    206.6 KB · Views: 141
  • IMG_2326.JPG
    IMG_2326.JPG
    28.6 KB · Views: 125
  • IMG_2318.jpg
    IMG_2318.jpg
    91.1 KB · Views: 139
  • IMG_2325.jpg
    IMG_2325.jpg
    86.9 KB · Views: 130
  • IMG_2328.jpg
    IMG_2328.jpg
    80.9 KB · Views: 141
  • IMG_2329.jpg
    IMG_2329.jpg
    113.4 KB · Views: 130
  • IMG_2330.JPG
    IMG_2330.JPG
    75.2 KB · Views: 134
OP
OP
69bronco351

69bronco351

New Member
Joined
Jan 6, 2020
Messages
18
Loc.
Mt. Pleasant
I kept telling myself to take a pic of the odometer while trying to get the roller tires on it. Let me check some of the dash pics to see if I accidentally caught in another photo
 
OP
OP
69bronco351

69bronco351

New Member
Joined
Jan 6, 2020
Messages
18
Loc.
Mt. Pleasant
Yes, I checked the carb and distributor tags and both are correct for 67-68. I havent seen a fuel pump like that in years. When I was trying to find the VIN on the frame, knowing its stamped about an inch behind the 3 stock holes drilled in the top of the frame. The frame is smooth for 6 inches and at first thought I thought it had been grinded off, but I found the little star stamp indicating the start of a VIN 7 inches from the holes and it matches the title and glovebox tag
 
OP
OP
69bronco351

69bronco351

New Member
Joined
Jan 6, 2020
Messages
18
Loc.
Mt. Pleasant
The odometer reads 19395. I'll get the title this weekend and I'll see if it has "exempt mileage" that indications the odometer has exceeded its mechanical limits to record mileage. Here in SC that means the odometer has rolled over. So I'm assuming its 119395
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
Most u13 that look mostly unaltered are low milage. That original ten screw fuel pump would lead me to believe that those are the actual miles unless those miles were accumulated quickly and that pump replaced in the 70's.
 

ford man

Contributor
Bronco Guru
Joined
Aug 31, 2008
Messages
2,366
Loc.
Leesburg Ga
Nice find and all the numbers line up too! That would be a nice one to restore with the V8 too.
 

77Bronco636

Sr. Member
Joined
May 9, 2006
Messages
860
I have been wondering the same thing...who is saving this GEM???? Hopefully a member on here ends up with it.......
 
Top