ultrarunner7
New Member
- Joined
- May 7, 2017
- Messages
- 25
Open to reasonable offers and trades. This is a turnkey build. Everything was done neatly and correctly. I have an immaculate 1970 frame, with an LAL Customs completelt finished tub. It's been worked and ready for paint. This is Lous full tub package. The entire thing is seam sealed, and epoxy primed and completely lined on the inside, bottom, and engine and inner clips. Also, the wheel wells were narrowed for the motor and are removable for access to the motor in the future. I have a fiberglass hood on it with hood struts. I have Ruby Red Metallic 3 stage paint for it if you want it. Its sitting on brand new BFG KO2s. It has a 2013 Boss 302(444 HP), Coyote(Roadrunner 
motor, 6R80 trans, with a PBH harness and PCM. I did a stealth install on it so its tucked under the fender. I've installed the fuel lines as well as the transmission cooler. Also, it has BCB stainless ceramic coated headers, magnaflow exhaust. BCB fuel tank and fuel pump is installed as well and 4:10 gears. This is a perfect setup. It needs paint, brakes, steering and a wiring harness... and then interior. Offers accepted. I will consider trades as well. This is my dream build but we are moving oconus and cant take a project car with us. I have no options for long term storage. This tub was $22k, the frame was Jeff Gordon's dad's, the motor and trans were pulled from vehicles with less than 10k miles. They're in awesome condition. The transmission looks brand new. If you've been wanting a coyote build but aren't sure what to do...this is your build. All of the pain in the ass stuff has been taken care of.
It needs:
Brakes, roll cage, steering(box included with vehicle), deive shaft, radiator, standard wiring harness, lights, painted(comes with rubbed metallic 3 stage standox paint and clearcoat), interior and top. I'm asking much less than I have
motor, 6R80 trans, with a PBH harness and PCM. I did a stealth install on it so its tucked under the fender. I've installed the fuel lines as well as the transmission cooler. Also, it has BCB stainless ceramic coated headers, magnaflow exhaust. BCB fuel tank and fuel pump is installed as well and 4:10 gears. This is a perfect setup. It needs paint, brakes, steering and a wiring harness... and then interior. Offers accepted. I will consider trades as well. This is my dream build but we are moving oconus and cant take a project car with us. I have no options for long term storage. This tub was $22k, the frame was Jeff Gordon's dad's, the motor and trans were pulled from vehicles with less than 10k miles. They're in awesome condition. The transmission looks brand new. If you've been wanting a coyote build but aren't sure what to do...this is your build. All of the pain in the ass stuff has been taken care of. It needs:
Brakes, roll cage, steering(box included with vehicle), deive shaft, radiator, standard wiring harness, lights, painted(comes with rubbed metallic 3 stage standox paint and clearcoat), interior and top. I'm asking much less than I have
Attachments
Last edited:
