Bronco Beau
New Member
Piston Knuckle broke on motor NOW 7500.00
1976 Ford Bronco Ranger
302
C-4 Automatic Transmission
38* 12.50 TSL SX’s
15 inch Bead Locks with Aluminum rings
Custom front and rear bumpers
Custom Skid plates and rocker guards
3 inch body lift
3.5 Wildhorse Suspension lift
Wildhorse raised Track bar Mount
Stonecrusher extended radius arms with heims
Rear gas tank skid plate
Power brakes
Power steering
Saginaw type power steering pump
Ford Nine inch with spool and 3.56 gears
Dana 44 Disc Brakes with 3.56 gears. Limited slip has been welded.
Stainless Steel Extended Brake Hoses
6 point cage with seats mounts
Corbeau 3 point harness
RCI racing seats with covers and extra padding
8500 pound Mile Marker Winch with Warn solenoids
F250 long travel shock mounts
Dual exhaust
Rocker lights
Hella Off Road Lights
Wildhorses Gorilla Flares
Interior is coated
Four Core Radiator moved forward with Taurus Electric fan.
Dual Exhaust
Also Have but not in pictures
Mint hard Top. It has not been on a while but should fit fine. (installed now)
Doors. The Driver’s door is missing the window track (Not Installed)
Stock Rear Seat
Auxiliary Fuel Tank and Skid plate
New Warn Hubs
Diamond Plate Aluminum Rocker Guards
36” TSLSX worn spare
And anything else I find in my shop that is Bronco Related. You can Have
I have it at the shop right now trying to get it aligned and tuning on the engine. Replacing the front hub and installing a 2 speed taurus fan.
I am selling due to the fact that I never drive it. I bought the Bronco in 1996 when I was 16 and drove it all the time. Got a new truck before college and kinda turned it into a crawler but has you can tell I am still a little hesitant it get it in 90% of the places it will go due to the fact that I want to preserve the body as much as possible.
It is a little dusty in the pictures. It has been stored in my shop for a while.
[/IMG]
[/IMG]
1976 Ford Bronco Ranger
302
C-4 Automatic Transmission
38* 12.50 TSL SX’s
15 inch Bead Locks with Aluminum rings
Custom front and rear bumpers
Custom Skid plates and rocker guards
3 inch body lift
3.5 Wildhorse Suspension lift
Wildhorse raised Track bar Mount
Stonecrusher extended radius arms with heims
Rear gas tank skid plate
Power brakes
Power steering
Saginaw type power steering pump
Ford Nine inch with spool and 3.56 gears
Dana 44 Disc Brakes with 3.56 gears. Limited slip has been welded.
Stainless Steel Extended Brake Hoses
6 point cage with seats mounts
Corbeau 3 point harness
RCI racing seats with covers and extra padding
8500 pound Mile Marker Winch with Warn solenoids
F250 long travel shock mounts
Dual exhaust
Rocker lights
Hella Off Road Lights
Wildhorses Gorilla Flares
Interior is coated
Four Core Radiator moved forward with Taurus Electric fan.
Dual Exhaust
Also Have but not in pictures
Mint hard Top. It has not been on a while but should fit fine. (installed now)
Doors. The Driver’s door is missing the window track (Not Installed)
Stock Rear Seat
Auxiliary Fuel Tank and Skid plate
New Warn Hubs
Diamond Plate Aluminum Rocker Guards
36” TSLSX worn spare
And anything else I find in my shop that is Bronco Related. You can Have
I have it at the shop right now trying to get it aligned and tuning on the engine. Replacing the front hub and installing a 2 speed taurus fan.
I am selling due to the fact that I never drive it. I bought the Bronco in 1996 when I was 16 and drove it all the time. Got a new truck before college and kinda turned it into a crawler but has you can tell I am still a little hesitant it get it in 90% of the places it will go due to the fact that I want to preserve the body as much as possible.
It is a little dusty in the pictures. It has been stored in my shop for a while.
Last edited: