• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

23 gallon sending unit?

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
Looking for a sending unit for a 23 gallon tank and a stock gauge. Should be a 70-10ohm correct? Anyone had luck sourcing one at the local parts houses? Thanks
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
What brand is your tank? Old NWMP (or now Sunset Metal Fab)? Something else?

Here's a page showing our stock and NWMP type units: Sending Unit but it's not showing our Sherman units. They're similar to, but not exactly like the NWMP units.

As for local, there is probably a local store out there that knows how to get some. They're not made of unobtanium, but it's a rare store that the parts person knows how to source something that does not have an easy "what vehicle model" and "is that a full-size Bronco" answer.

Good luck.

Paul
 
OP
OP
bigjhoov

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
I believe it's an older NWMP tank,I traded for it a couple of years ago.

Yes, I'm well versed in the struggles of obtaining info from the local counter monkeys. I just thought someone might have a part # handy. Thanks
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
A marine supply company maybe? Got Boat there in Rockwall do ya?
I bet if you found one in the semi-universal category with that 73-10 range you could make the tweaks necessary.
Pretty sure Aero just supplies a universal unit, because you have to go through the whole setup yourself when you get the tank.

But that's the easy part, once you find one.

Good luck.

Paul
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
I believe it's an older NWMP tank,I traded for it a couple of years ago.

Yes, I'm well versed in the struggles of obtaining info from the local counter monkeys. I just thought someone might have a part # handy. Thanks

just replaced mine last month from WH works good
 

gnpenning

Contributor
Bronco Slave
Joined
Dec 26, 2011
Messages
2,601
Loc.
I have more questions than answers.
Thanks for sharing that Paul.I picked up a older NWMP recently that needs a new sender. When I checked Sunsets site I couldn't find it, was going to wait until I was closer to installing it before I called them with crossed fingers. Now I know you guys carry them I can relax.

This is why I think it's great to have vendors frequent this site. Lucky for you guys more don't see the value in it. You do a great job of helping with out giving a sells pitch, and being respectful of your competitors. I appreciate your help.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Thanks. Glad to help.
You should be happy with the NWMP tank I think. I used one for years and it worked great.
Is it used, or never installed? If never, or not sure, definitely do what you can to rinse it out first. Before you hoist it up and mount it!

And even though we test every sender before it gets put on the shelf, that's done just to make sure that it meets the rough 73-10 ohm range factory spec.
It's a good practice to test the unit with your wiring before putting it in the tank for the last time.
Everybody's wiring and gauges are slightly different by now, so it doesn't hurt to verify that it's going to read where you expect it to before it's installed.

Paul
 

Glass Pony

Contributor
Bronco Guru
Joined
Feb 13, 2012
Messages
1,954
Loc.
Sussex County Delaware
I have a NWMP tank with a build date of 1987 and still going strong.
I installed the WH sending unit about 6 years ago and is working fine. It goes to "Full" when you fill it up but still has about 5 gallons in it when it reads empty, which is fine by me.:)
 

gnpenning

Contributor
Bronco Slave
Joined
Dec 26, 2011
Messages
2,601
Loc.
I have more questions than answers.
The one I purchased is used. Looking inside it is amazingly clean, which makes me really happy. I didn't have to worry about stopping rust before putting it on a shelf waiting it's turn. From your previous posts about testing before installing, I was aware of the potential issue. Just like cleaning out a new tank before installing. I love this site. Thanks for the reminder.
 

Authorizedcc

Jr. Member
Joined
Apr 7, 2014
Messages
92
This is the sending unit that I replaced because of aftermarket gauges. IMG_20180701_173009953.jpeg IMG_20180701_172947330.jpeg
f2e77735faac788fda491ba025c20c04.jpg


Sent from my Moto G (5) Plus using Tapatalk
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Was that out of a NWMP/Sunset tank there doc?
Because of the solid beam and riveted construction, it looks like it's made for a specific tank. Looks like a good one.

Then again, all of the tanks are so close to being the same depth by just an inch or two, your sender would likely work fine in any of the common tanks, maybe with just a tiny bit of tweaking.

Thanks for bringing it up. Maybe bigj will be interested if he hasn't already ordered a new one.

Paul
 
Top