• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

250-6 engine

Status
Not open for further replies.

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
Complete '76 250 I6 with bellhousing and clutch..still in '69 EB rolling chassis . The head was completely overhauled with new valves and guides less than 2K miles before I parked it, but the lower end ofthe motor is original and needs to be gone through. Was running fine when parked but is now stuck..don't know how badly...but it did get some rain down the carb a couple times when the wind blew the cover off it. Has bracket on the engine for AC and PS pump..but neither is there now.

Free to good home.
 

ochretoe

Sr. Member
Joined
Feb 23, 2005
Messages
802
Loc.
Millington
Is there anyway you would concider shipping this to Tn.? I know it would be a pain in the arse but I really would like to have it. Thanks
Steve
 
OP
OP
bmc69

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
ochretoe said:
Is there anyway you would concider shipping this to Tn.? I know it would be a pain in the arse but I really would like to have it. Thanks
Steve

I ship engines all the time..but figger at least $250 bucks plus crating/pallet costs. Cost gets ugly real quick and fast approaches what a JY takeout would run ya.. %)
 

ChrisinWV

Bronco Guru
Joined
Apr 1, 2002
Messages
1,372
Loc.
St George Island, MD
dang, if it was running , it would be perfect for the 68 that just found me.....The son says the old man will sell for $300, but it has a non running 289 in it.
I have to check it out.
Less than thirty miles from here.....
He was some guy thinking I would actually trade this stuff I have he called junk for this funny looking green paper....what a hoot!!!!
Metal for paper, doesn't seem like a good deal to me.....Well, when he figured I didn't want any of his paper, he figgers I will give what paper I have to Dad for the ole Bronc....now paper for Bronco, that sounds like a deal!!
But since this motor isn't running, this is nothing but shameless hijack, er I mean BUMP TTT

Shucks Ochretoe, you are in the wrong corner of TN, I am gonna be heading down to SW VA this weekend, and could bring it that far for some gas $, but it's a long way across the state to you.
 
Last edited:
OP
OP
bmc69

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
It might still run just fine..I suppose I should take a breaker bar to the front end and see if its really stuck that bad. But it was starting to loose oil pressure just a bit and had some blowby..starting to drip from rear main..all the usual signs that an engine I had put a lot of miles on was simply tired.

I kicked myself later for getting the head all done up..she was weeping coolant at the head gasket edge was the only reason I pulled it..and you know me.."well since its off, might as well get er redone". That was before I finally got all the equipment in house to do heads myself again.%)
 

ChrisinWV

Bronco Guru
Joined
Apr 1, 2002
Messages
1,372
Loc.
St George Island, MD
Yes I know that disease well....
Well I am getting the D and am just about broke, the only thing I can think of to do is buy another EB.
That should cheer me up shouldn't it?
If I can find a driver, I will sell the Big Bronco, just to recoup some funds.
I have a line on a 289, might just have to go pick that thing up.
Speaking of heads , that set of 302 heads I was talking about are marked D00E 302 69 keepers?
 
OP
OP
bmc69

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
Yr filling my thread with drivel..;D

I have 289s here, you dummy..and 302s..and 351s..and 400s and 360s and 390s..and 460s and 428s and 429s and ....

Nothign special about those heads..but we throw nothing away, as you know.;)
 

ChrisinWV

Bronco Guru
Joined
Apr 1, 2002
Messages
1,372
Loc.
St George Island, MD
Sorry ;-) Those aren't even the heads I was looking for, more drivel to come. I'll take it off hijack mode.....or maybe someone will pick it up so we will stop...:B
SOmebody should get this motor!!!!
TTT
 

ochretoe

Sr. Member
Joined
Feb 23, 2005
Messages
802
Loc.
Millington
Shucks Ochretoe, you are in the wrong corner of TN, I am gonna be heading down to SW VA this weekend, and could bring it that far for some gas $, but it's a long way across the state to you.[/QUOTE]

Chris, if you could get it to a State park in upper east Tn and drop it there that would help. One like Warriors Path or David Crockett birth place, I could come get it there. I work for Parks so it wouldn't be a big deal for them to hold it a few days. If you think you could do that let me know and we'll discuss gas money. Thanks
Steve
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
ochretoe ..think of this as another ..ttt.
but you said Warriors Path... David Crockett birth place ..there is a State Park here in central Texas called Betsy Crockett State Park ..in Action /Granbury Texas ....It is the place where his wife is buried...Texas smallest state park ..
There is a very tall marker for her there ......I used to stop there and eat a sack lunch ..Then walk out an talk to the old timer's there ...Thanked her several times for TEXAS freedom .........
 

claymore_mo

New Member
Joined
Feb 11, 2005
Messages
26
Has anything been done with this? If not I might be interested in buying the bellhousing and clutch. It would have to be shipped to MO though. But like I said, I'd throw a little money at you to make it worthwhile to pull the bellhousing. Let me know, Morgan.
 
Status
Not open for further replies.
Top