3 1/2 inch lift uncut!! NEED HELP.

[4xfloored]

I saw you posted in your Backspacing thread:

Did you get what you needed?
I got stuck at work today & tomorrow and won't be able to pull my rim off till sunday. Unless you don't need it anymore?

Thanks
Fathom

NO ONE HAS CONFIRMED THE B/S I HAVE BEEN TOLD 3.75 AND 4.5" CAN ANY BODY CONFIRM EITHER MEASUREMENT?? %)

 

[73explorer]

hard to tell on allens bronc, but that thing looks pretty top heavy with those 9.5" tires. wouldnt take much of a quick turn to stain your pants

 

[allennella]

Nice rig Allen... How about some stats on it?

Thanks,

'77; 4-1/2" BC Springs, F250 Towers, Inboard Rear Hoop, Blistein Shocks, Duff Arms, 3" Body lift, NP435, remaned 302, DUI Dist.; Bumpers are next on the list....

 

[720Racer]

Milo,

I'm not trying to hijack your thread.

Thanks,

'77; 4-1/2" BC Springs, F250 Towers, Inboard Rear Hoop, Blistein Shocks, Duff Arms, 3" Body lift, NP435, remaned 302, DUI Dist.; Bumpers are next on the list....

Allen,

Do you have any more pics? My 69 is un cut, and I just assumed that I'd be cutting the rears, but I sure do like to the look of your truck. I'd like to see it from the side, and maybe some pics of the rear suspension.

Real nice,

Galen

 

[4xfloored]

Milo,

I'm not trying to hijack your thread.

Not a problem Galen, I would also like to see pics from the side, I dig the uncut lifted look tooooooo

 

[daddyo]

NO ONE HAS CONFIRMED THE B/S I HAVE BEEN TOLD 3.75 AND 4.5" CAN ANY BODY CONFIRM EITHER MEASUREMENT?? %)

I measured one of the stock, 5.5" wide Ford steel wheels that was in the
back of my rig when I bought it. The backspacing is 3 5/8".

Andrew

 

[allennella]

Milo,

I'm not trying to hijack your thread.



Allen,

Do you have any more pics? My 69 is un cut, and I just assumed that I'd be cutting the rears, but I sure do like to the look of your truck. I'd like to see it from the side, and maybe some pics of the rear suspension.

Real nice,

Galen

Thanks, I've been happy with the decision not to cut, the 1/4's were about the only thing I didn't have to replace, rust...

 

[Fathom]

do you know what the backspacing is and rim width???

3.75" Backspace (if you measure from the bolt plate to the outer most edge of the rim)

 

[720Racer]

Thanks, I've been happy with the decision not to cut, the 1/4's were about the only thing I didn't have to replace, rust...

Allen,

Once again, that's very nice. I've always like the look of "more lift than you need", and you have got that, indeed. Very clean and classic, yet modified and capiable.

I might have to rethink cutting mine.

Galen

 

[raharr3]

I am having the same problem (cut or not to cut) ;D

 

[73stallion]

i said this a few months ago, i saw a bronco in denver that had the rear uncut fenders flared out (kind of like glass baja fenders, but steel) to clear 33x12.50's on 10" rims and it looked awesome! just roll the fender out so it sticks out farther.

 

[Fathom]

I am having the same problem (cut or not to cut) ;D

Yep, decisions decisions......

 

[73stallion]

brian, will you rattlecan those doors, please? ;D

 

[Fathom]

brian, will you rattlecan those doors, please? ;D

HAHAHAHA ;D What color?

Hows this?

 

[4xfloored]

i said this a few months ago, i saw a bronco in denver that had the rear uncut fenders flared out (kind of like glass baja fenders, but steel) to clear 33x12.50's on 10" rims and it looked awesome! just roll the fender out so it sticks out farther.

Ben would'nt it make the paint crack? would have to be rolled qiut a bit
I wonder if any one else has done this and the have pics....please ;D anybody!!!

 

[73stallion]

HAHAHAHA ;D What color?

Hows this?

much better!

 

[73stallion]

Ben would'nt it make the paint crack? would have to be rolled qiut a bit
I wonder if any one else has done this and the have pics....please ;D anybody!!!

the paint might chip a little, yes. i had to roll the fenders on a ranchero not too long ago and the paint chipped a litle under the lip, but if it was prepped properly then it shouldn't go too far, SHOULDN'T. do you have fresh paint on your rig?

 

[4xfloored]

the paint might chip a little, yes. i had to roll the fenders on a ranchero not too long ago and the paint chipped a litle under the lip, but if it was prepped properly then it shouldn't go too far, SHOULDN'T. do you have fresh paint on your rig?

Actually no, it about 5-10 years Im told, I am far from any type of body man... I try to meet up with you a fab fords and may be you can give me a tip or two about rolling

 

[Fathom]

Actually no, it about 5-10 years Im told, I am far from any type of body man... I try to meet up with you a fab fords and may be you can give me a tip or two about rolling

Look for Ben, but he will might be wearing one of his famous "Wife Beater" white t-shirt! ;D Picture provided by DownhillManiac99 ;D

Sorry Ben, I could not resist

 

[DownhillManiac99]

Look for Ben, but he will might be wearing one of his famous "Wife Beater" white t-shirt! ;D

Sorry Ben, I could not resist

Thats a damn nice picture, I wonder who took it? ;D I want my copyright pay!