Tmckinney
New Member
When the truck is sitting not running, the truck slides right into any of the four gears.
I have played with the idle adjustment screws on the carb and have experience some improvement in ease of shifting.
when it is running I have to force the transmission into 1st and reverse. 2nd and 3rd are no problem once the bronco is up and moving. When going into reverse it definitely grinds and has to be jammed into gear.
I replaced the clutch not too long ago and thought that i had the clutch adjusted properly.
I start my carb adjustment at 2 full turns out and lean and rich the mixture from there.
Forgive me for my ignorance but i've taught myself everything I know about mechanics.
Does this sound like a clutch adjustment issue, carb adjustment, or both, or even something else.
Thanks,
Tyler
I have played with the idle adjustment screws on the carb and have experience some improvement in ease of shifting.
when it is running I have to force the transmission into 1st and reverse. 2nd and 3rd are no problem once the bronco is up and moving. When going into reverse it definitely grinds and has to be jammed into gear.
I replaced the clutch not too long ago and thought that i had the clutch adjusted properly.
I start my carb adjustment at 2 full turns out and lean and rich the mixture from there.
Forgive me for my ignorance but i've taught myself everything I know about mechanics.
Does this sound like a clutch adjustment issue, carb adjustment, or both, or even something else.
Thanks,
Tyler











