33x9.5x15.....????

[tmaddux911]

I'm coming to realize that finding 33x9.50x15's is near impossible. I know that BFG either did or does make them. Anywhere i have seen the BFG's listed they are forever back ordered. I do believe that i may have heard BFG stopped making these. Anyone know of another manufacture or avenue to find this tire size?

 

[73stallion]

Nobody that I know of. It's either the BFG 33x10.50 or the Swamper 34x9.50.

 

[tmaddux911]

Correct me if I'm wrong... dont think 10.5 will cut it on the stock wheels.

 

[burntfish]

I run 35/13.5/15 krawlers on 15/8 rims no problem. Its like having beadlocks.

 

[AZ73]

Correct me if I'm wrong... dont think 10.5 will cut it on the stock wheels.

Will fit 7-9 inch rim. designed specifically for an 8.5 inch rim according to TireRack.com

 

[tmaddux911]

All great info! Who knows if i can tuck a 33x10.5 on a stock rim, uncut Bronco with 3.5 SL?

 

[burntfish]

check custom wheels direct. It says they have them at $836.00 shipped for 4.

 

[bigpitbull]

All great info! Who knows if i can tuck a 33x10.5 on a stock rim, uncut Bronco with 3.5 SL?

I think nickstrix did this with the green luber he built. It's in the luber time thread... Check it out

 

[tmaddux911]

check custom wheels direct. It says they have them at $836.00 shipped for 4.

For which tires?

 

[burntfish]

Bfg 33/9.5/15

 

[broncnaz]

several guys are running 33x10.5s on stock rims and uncuts.

 

[RIbronco]

There's a better selection in the metric sizes if you go up to a 16" wheel.

 

[rbodine]

I just sold a set of 33 9.50/15, they were all terrains...the brand slips my mind. I couldn't believe the number of calls I got for them...I never knew they were so popular with hunters.

 

[tmaddux911]

custom wheels direct hasnt seen them in 6 months

 

[tmaddux911]

Tire Rack called BFG for me, yes they still make them they just havent produced any in about 5 months and dont know when they will start back up again...

 

[bknbronco]

step up to a 35 or 37! 33's are dinky!

 

[leucbronc]

I've got 33x10.5 KM2's on stock rims. See pic in my gallery... rears do rub but I think its the bottom front of the rear quarter...

 

[00gyrhed]

i run p255/85/16s true 33" actually a little more new and usually less than 10" on 7" rims I bet they would be like 9" on a 6. Problem is like with a lot of tires the hieght and section vary quite a bit from one manufacturer to another, and you have to go to 16's, and the selection is pretty limited so basically I am not sure why I fell in love with the size. Kind of like my wife.

 

[tmaddux911]

i run p255/85/16s true 33" actually a little more new and usually less than 10" on 7" rims I bet they would be like 9" on a 6. Problem is like with a lot of tires the hieght and section vary quite a bit from one manufacturer to another, and you have to go to 16's, and the selection is pretty limited so basically I am not sure why I fell in love with the size. Kind of like my wife.

haha awesome!!! Yeah i really dont want any rubbing issues. I also plan on doing so mild offroading. I'm starting to think that 31x10.5x15's is going to be my best option for now. I just had the factory wheel powder coated and cleaned up the stock hubcaps so i really dont want to change my set up. Thanks for all the great info though.

 

[nvrstuk]

With stock offset rims, uncut and 33x9.50x15" BFG Mud Terrains i could cruise town but I couldn't go off road at all without them rubbing on my rear uncut fenders.

On a grocery getter you'd probably be ok.