• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

351 W

Status
Not open for further replies.

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,549
This is a 1977 351W with 29k original miles. The motor is complete except for exhaust manifolds. Duraspark, stock 2 barrel, PS pump, alt. and starter. Also with this comes a 2wd C6. Both are in good working order. I am trying to clear some shop space.
Bax
 

Attachments

  • P1010012.JPG
    P1010012.JPG
    77.9 KB · Views: 132
OP
OP
bax

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,549
Yeah I think it is. I'm not going for big money I just want it out of the way. It has very low miles and I know it all works. All the linkage it there. the engine harness is there. I did take the motor mounts off but they were not for a bronco. I had to do that to remove it out of the van. Anyway if you want to upgrade to a 351 here is a real good start. Plus the small bolt C6 works good too. In fact I have a 4x4 extension housing for the c6. All you need it the correct tail shaft and it will convert over to a 4x4. I have a few 205's floating around the shop too. But we are talking motor and trans.
 
Status
Not open for further replies.
Top