• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

4r70w line adapter source

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
5,799
Info is all over the map. I have one, but need one more, see pic. I know the line is a 5/16 th inverted female flare, but don’t know the case side size. Some say 1/4 , others say 18 or 16.5 mm IMG_1407.jpeg IMG_1409.jpeg IMG_1407.jpeg IMG_1409.jpeg
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,040
Loc.
NH
Will check tomorrow....May have one at work
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,040
Loc.
NH
20240308_082814.jpg
 

Attachments

  • 20240308_082827.jpg
    20240308_082827.jpg
    113.7 KB · Views: 22
  • 20240308_082823.jpg
    20240308_082823.jpg
    113.4 KB · Views: 14

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,040
Loc.
NH
SEND me the addy...you can have it....won't be much to ship, don't worry about it....we gotta keep each other rolling!
 

ba123

Contributor
Bronco Guru
Joined
Oct 29, 2022
Messages
1,948
Loc.
CA
Just so you know what it is... it's a 1/4 NPS (STRAIGHT Pipe Thread--not tapered)
 
OP
OP
F

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
5,799
So the non case side ended up being 3/8ths not 5/16ths. I read 5/16ths on the internet but that was wrong.
 
Last edited:
Top