4r70w to np205/D20/Atlas 2 measurements

[seanwanlass]

Good evening, I'm looking for measurements (length) for the different 4r70w/tc combos. Also, what adapters and crossmembers did you use?

4r/ D20
4r/ Atlas
4r/ np205

thanks

 

[mdainsd]

With D20 using Advance Adaptors the transmission/transfer case combo is 2 3/4" longer. Just long enough that there is an interference with the transfer case and body cross member if sticking with no body lift . I modified the transmission crossmember to lower the transfer case just enough to fit under. I dont like body lifts.

 

[lars]

Which measurement do you need? Front of transmission to front of t-case? Or...? I'm running an AWD 4R70W using the OEM transmssion tail housing. Atlas bolted directly to that, no adapter. Made my own crossmember.

 

[1973bronco1973]

4r70 awd direct to np205
40.5” front of bell housing to the rear output yoke

 

[seanwanlass]

With D20 using Advance Adaptors the transmission/transfer case combo is 2 3/4" longer. Just long enough that there is an interference with the transfer case and body cross member if sticking with no body lift . I modified the transmission crossmember to lower the transfer case just enough to fit under. I dont like body lifts.

Thank you

 

[seanwanlass]

4r70 awd direct to np205
40.5” front of bell housing to the rear output yoke

Which measurement do you need? Front of transmission to front of t-case? Or...? I'm running an AWD 4R70W using the OEM transmssion tail housing. Atlas bolted directly to that, no adapter. Made my own crossmember.

Thanks Lars. I was looking for a measurement from front of trans to center of yoke . it doesn't have to be axact.. Thx

 

[lars]

Thanks Lars. I was looking for a measurement from front of trans to center of yoke . it doesn't have to be axact.. Thx

It shall be so tomorrow. Suffer with me; I am retired, therefore a pathetic slow poke.