• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

5.0 efi computer location

Colliedog3

Jr. Member
Joined
May 22, 2017
Messages
71
Loc.
Waxhaw NC
I am in the process of converting my bronco to mustang style efi and I was wondering where to mount my computer. I also know I have to make a hole in the firewall for the harness to pass through and I would prefer not to remove the heater. Where is a good place to cut this hole?
 

SevenT

Contributor
Sr. Member
Joined
May 23, 2009
Messages
523
Loc.
Southern Colorado
EFI computer location

Colliedog3,

Search is your friend. Many have done this swap. I will attach the RJM harness instructions that give the location of the hole in the firewall. Good luck.

v/r,

SevenT
 

Attachments

  • Engine - EFI -RJM harness installation.pdf
    558 KB · Views: 236

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
I put mine on top of the heater. Tucks in nicely. Had to pull some insulation out to make it fit.


Sent from my iPhone using Tapatalk
 

Mark1911

Full Member
Joined
May 14, 2017
Messages
174
Hello. Mine is mounted like the explorer, I purchased the ECM box and internal heat sink for a 2000 model explorer 5.0l all from Ford or you can scour pick a part wrecking yards for the needed parts, just be aware in order to remove the ECM box and heat sink you will need to remove the entire dash from the truck.
I mounted mine on the drivers side just below the cowl, the box is inside and the computer connection is in the engine compartment, yes you will need to remove the fresh air box on that side and cover the square hole where the top of the fresh air vent was.
 

hankjr

Contributor
Bronco Guru
Joined
May 11, 2013
Messages
1,761
'03-'07 (i think) Escape boxes are very easy to get out and robust. dont fight with the explorer version. dont forget to get the gasket.

I put mine right in the middle of the firewall.

Hank
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
some have lengthened the wires and put it on the drivers side behind the parking brake.
 
Top