5.0 fresh air intake????

[bax]

Ok i'm finishing up a 96 explorer 5.0 /4r70w swap into the bronco. I need some help with the air filter set up. I have to keep the computer connections in the fresh air intake but the explorer set up is toooo big. What do you guys use for the filter / fresh air plumbing on these?
Thanks Bax.

 

[Timmy390]

What's tooooo big? I assume you're trying to use the stock Explorer airbox?

I'm using the upper intake off a 96 along with the T-body, intake hose and MA sensor. I'm using an adaptor on the MA sensor so a AEM dry filter will attach. It fits on top of the inner finder with no issues.

If you're trying to use the stock Explorer air box, you will need to move the battery to the D-side and put the air box where the battery was.

Tim

 

[jgrow]

Timmy,

Did you use something like this? http://www.amazon.com/96-01-Explorer-Sensor-Adapter-Filter/dp/B0077E2IZ2 I'm doing a 98 302 in mine and am trying to figure out whats best without breaking the bank. thanks.

 

[Toddml]

I will be using the same adapter, MAF with filter will sit on the fender. I am not using the 90 degree bend

 

[jgrow]

I will be using the same adapter, MAF with filter will sit on the fender. I am not using the 90 degree bend

thanks Todd

 

[Timmy390]

Timmy,

Did you use something like this? http://www.amazon.com/96-01-Explorer-Sensor-Adapter-Filter/dp/B0077E2IZ2 I'm doing a 98 302 in mine and am trying to figure out whats best without breaking the bank. thanks.

Yes I did. I bought the adapter off Ebay for and the AEM dry filter form AEM directly. AEM-21-2147BF http://www.aemintakes.com/search/product.aspx?prod=21-2147bf

Tim