mattyq17
Bronco Guru
- Joined
- Jul 11, 2007
- Messages
- 1,597
Figured I should update this thread. I have got a few things done since the last time I posted. So far I have:
Installed Flaming River column.
Had Viperwolf fix my shifter linkage on the C4
Replaced all fluids, except radiator, more on that later
Replaced front floor pans
Installed windshield and hard top windows
WH 1" body lift
WH C4 shifter linkage from column
Pertronix Ignitor
New rotor, cap, plugs, and wires
Cleaned carb, installed 1" spacer
Replace alternator
WH illuminator Headlight harness with H4 bulbs
New tires
WH throttle cable
Next step up is:
Custom cage from my brother in law(should start next week)
Procar seats from WH
Fold and tumble rear seat from WH
Hummer 3 point seat belts
Clean, prime, and apply Raptor liner in the inside of the tub
New radiator from WH, fan shroud
Run AT cooler lines to the new radiator since the PO has no cooler for the C4, only a loop of hose with a filter in it.....%)
WH C4 kickdown cable
New intake gaskets
Should be a fun upcoming month. I will post pictures as it progresses.
Installed Flaming River column.
Had Viperwolf fix my shifter linkage on the C4
Replaced all fluids, except radiator, more on that later
Replaced front floor pans
Installed windshield and hard top windows
WH 1" body lift
WH C4 shifter linkage from column
Pertronix Ignitor
New rotor, cap, plugs, and wires
Cleaned carb, installed 1" spacer
Replace alternator
WH illuminator Headlight harness with H4 bulbs
New tires
WH throttle cable
Next step up is:
Custom cage from my brother in law(should start next week)
Procar seats from WH
Fold and tumble rear seat from WH
Hummer 3 point seat belts
Clean, prime, and apply Raptor liner in the inside of the tub
New radiator from WH, fan shroud
Run AT cooler lines to the new radiator since the PO has no cooler for the C4, only a loop of hose with a filter in it.....%)
WH C4 kickdown cable
New intake gaskets
Should be a fun upcoming month. I will post pictures as it progresses.