• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

66 half cab build

derrick1032

Jr. Member
Joined
Feb 26, 2005
Messages
100
Loc.
Calgary, Canada
Now that I'm mostly done ,I finally have a little extra time to do a write-up that I wanted to start a long time ago but was to busy.Unfortunately my before pisc were lost,so I only have the during and after pics.I'll ttry post them in order.Here goes

-1966 bronco half cab
-38x15x15 boggers
-89 5.0L H.O
-aod tranny
-3 1/2 susp. 3" body lift
-full width d44/9" with ARB's
-203/d20 doubler(home built)
-hydraulic assist steering
-homebuilt bumpers/radius arms/cage
-paint & body done by me
-lots of other stuff I'll post as I go
 

Attachments

  • tub.jpg
    tub.jpg
    202.1 KB · Views: 170
  • old frame.jpg
    old frame.jpg
    183.8 KB · Views: 143
  • firewall.jpg
    firewall.jpg
    207.1 KB · Views: 169
OP
OP
derrick1032

derrick1032

Jr. Member
Joined
Feb 26, 2005
Messages
100
Loc.
Calgary, Canada
here are the pics from when I was fitting everything.I had the facotry fulltop but liked the halfcab better,so instead of paying an arm and leg for one I built my own.You can see the seam in the center where I removed a couple of feet and welded it back together.Another benefit is that I used the rear glass and frame from the fulltop,which is larger then a halfcab rear window and it is also 2" farther back than a factory halfcab for more head room.
 

Attachments

  • halfcab.jpg
    halfcab.jpg
    130.3 KB · Views: 240
  • pre-fit.jpg
    pre-fit.jpg
    160.7 KB · Views: 353
  • sailpnl.jpg
    sailpnl.jpg
    158.6 KB · Views: 343

thesnake

Bronco Guru
Joined
Jun 20, 2001
Messages
3,503
derrick1032,

I like how you did thetop. Any other pointers?

John
 
OP
OP
derrick1032

derrick1032

Jr. Member
Joined
Feb 26, 2005
Messages
100
Loc.
Calgary, Canada
thesnake said:
derrick1032,

I like how you did thetop. Any other pointers?

John
Yes,unless your a good fabricator,you may want to just buy a halfcab.If you want to do this yourself patience is a must.I was able to look closely at a fellow EB and take measurements and pics so it would look as close to factory as possilble.Welding the seam is difficult because to much heat will warp it in a hurry,the drip channel was spliced about 3/4 the way back to offset the seam for strength and if you look closely at any top there are little plates on the drip channel to cover the seam.The side panels I made from scratch and simply bent over my knee to get a nice smooth curve.the glass frame was simply welded across the top and to the newside panels.I have about 10 hours of bodywork/prep time into it.It also helps that I am a Bodyman/painter by trade.
 
Last edited:
OP
OP
derrick1032

derrick1032

Jr. Member
Joined
Feb 26, 2005
Messages
100
Loc.
Calgary, Canada
built myself a rotisserie,sandblasted the tub inside and out.Welded a few pinholes then primed it with DP90.I then sent it out to get spray on box liner applied on the inside and underside.It basically turned into a storage shelf while I worked on the frame.
 

Attachments

  • lined tub.jpg
    lined tub.jpg
    187.3 KB · Views: 188
  • rotissrie1.jpg
    rotissrie1.jpg
    160.5 KB · Views: 175
  • rotisserie2.jpg
    rotisserie2.jpg
    169.1 KB · Views: 143
OP
OP
derrick1032

derrick1032

Jr. Member
Joined
Feb 26, 2005
Messages
100
Loc.
Calgary, Canada
sandblasted the frame and painted it ultraviolet metalic.painted the engine to match and polished the intake just to add some bling.
 

Attachments

  • frame.jpg
    frame.jpg
    163.6 KB · Views: 136
  • eng 1.jpg
    eng 1.jpg
    177.6 KB · Views: 153
  • chasis.jpg
    chasis.jpg
    197.2 KB · Views: 151

NicksTrix

Bronco Guru
Joined
Aug 1, 2001
Messages
6,410
did you use a heat additive in your paint on the engine?
neat build.
 
OP
OP
derrick1032

derrick1032

Jr. Member
Joined
Feb 26, 2005
Messages
100
Loc.
Calgary, Canada
NicksTrix said:
did you use a heat additive in your paint on the engine?
neat build.
no I did not.I have painted many engines before and never had a problem.I talked to our paint rep and he said it should work other than a little discoloration around the exhaust where I personally hav'nt seen it happen yet(coverin his own butt I presume).
 

BuckBronco

New Member
Joined
Jan 3, 2007
Messages
1
Loc.
Austin
1/2 cab details

I have plans to cut my full cab down to a 1/2 as well. Yours looks great! Do you have the measurements for where you cut it still? I am specifically wondering how/where to cut the length out of the top to allow the curve lines to match. You might have posted this in the tech forum instead of chat, but I'm new to classicbroncos and don't really know what I'm doing yet. Sorry. Thanks for any information you can provide, though!
 
OP
OP
derrick1032

derrick1032

Jr. Member
Joined
Feb 26, 2005
Messages
100
Loc.
Calgary, Canada
BuckBronco said:
I have plans to cut my full cab down to a 1/2 as well. Yours looks great! Do you have the measurements for where you cut it still? I am specifically wondering how/where to cut the length out of the top to allow the curve lines to match. You might have posted this in the tech forum instead of chat, but I'm new to classicbroncos and don't really know what I'm doing yet. Sorry. Thanks for any information you can provide, though!
Sorry but I didnt write down any measurements.I got a few measurements from a fellow EB halfcab owner to keep it close to factory spec.I removed the exact amount that the full top is longer by,and kept the seam in the middle as that was the best place for the curves to meet.Although I did have to make some slits on the rear corners to make it a perfect fit

p.s. this would be an excellent time to lengthen it if your a taller fellow
 
Top