• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

66 u13 seat

bam

Contributor
Full Member
Joined
Jun 11, 2017
Messages
291
Loc.
Laurel, Ms
just picked up 66 u13 has no seat. what are my options. will a bench seat or buckets from any year fit the 66. need one front hubcap too.
 

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
Questions:
Are you trying to keep it stock or stock does not matter?
Did it have bench or buckets originally?

If it had just a bench the mounting holes will be out by the doors. If it had buckets you will have holes by the doors and in the center area.

Any bucket or bench from 66-77 Bronco will fit providing the holes are correct.

Here's a link to a wanabe hub cap http://www.ebay.com/itm/1966-66-FOR...ash=item2a85a3bfb3:g:VhEAAOSwOMdZSnLo&vxp=mtr

Might work just depends on what you are building and how "stock" you wan tit to be.

Jim
 

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
I want to keep it stock it had buckets in it.

In that case your options are to keep an eye on the classifieds here on classic and anywhere else you can find. The 66 bucket was just a 66-67 thing so there is a more limited supply.

Post in the parts wanted section too if you have not done that already. Lots of people looking to sell there left overs.

Good luck with the hunt.

Jim
 

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
are the seat brackets a 66 and 67 thing too

It's been a while since I has a 66-67. I don't know for sure so I will venture a guess that the bucket seat brackets are all the same 66-77. Pass side flip forward with latch at the back 66-77. Driver side on a slider. Might be some minor difference.

Jim
 
Top