- Joined
- Jan 24, 2009
- Messages
- 2,550
I bought this truck to plow snow with. I wasn’t looking for anything special, just something to put the plow on so I didn’t destroy my 69 wagon with all the salt from the roads. After I got the bronco home and realized that it really has no floor pans on both the drivers and passenger side . I decided it would be a good idea to put some floors in since I will most likely be hauling my kids in it on snowy days (picking them up from school etc…).
I have never done this before but decided that since this is “Just a plow Bronco” I will do all the work on it myself I have no experience with body work and I don’t know how to weld, So here I go ripping into the floors with a lot of ambition and some welding help from “Elkhart Bronco “
The pictures attached are leading up to today.This has been a lot slower going than I thought it would be. I can’t believe I already have about 25 working hours in getting to this point.
I have never done this before but decided that since this is “Just a plow Bronco” I will do all the work on it myself I have no experience with body work and I don’t know how to weld, So here I go ripping into the floors with a lot of ambition and some welding help from “Elkhart Bronco “
The pictures attached are leading up to today.This has been a lot slower going than I thought it would be. I can’t believe I already have about 25 working hours in getting to this point.
Attachments
Last edited: