- Joined
- Jul 7, 2008
- Messages
- 6,807
NOT MINE !!!!!!!
BUT :
http://tampa.craigslist.org/hil/cto/1174956034.html
Reply to:sale-rrvpk-1174956034@craigslist.org [Errors when replying to ads?]
Date: 2009-05-17, 8:34AM EDT
1972 Ford BroncoThis is a very road worthy truck. The rear axle gears need to be changed out to match the front. The previous owner told me it had 3.50 gear ratio. I have overhauled the front axle over the summer. When I took the inspection cover off I found no oil in it. Ordered from Toms Bronco a new locker, bearings, seals and ball joints to make it right as well as the suspension and lift kit I bought from them. New Spings in rear and new shocks. The only rust that I see is along the rear quarters where the body lines are. This is resent and would be an easy fix at this point. The painter did not get enough paint on the underside of the line. As for the rest of the body it is in very good shape. I have done mostly mechanical work to it. New poly gas tank, front suspension, rear suspension, front dana 44 was rebuilt with new posi and new window tracks, new heater core, new wiper arms and blades and some other stuff.. A few things that need to be done are, heater fan ( the fan bearings are starting to go on it) and change the rear end gears and seals. I have a new set of 4.11 gears that is available to the winner at an extra cost. If you would like to see this Bronco or test ride it let me know. I want to keep the truck but have another project.
It has a 200 CID rebuilt inline 6 with 3 speed trans
BUT :
http://tampa.craigslist.org/hil/cto/1174956034.html
Reply to:sale-rrvpk-1174956034@craigslist.org [Errors when replying to ads?]
Date: 2009-05-17, 8:34AM EDT
1972 Ford BroncoThis is a very road worthy truck. The rear axle gears need to be changed out to match the front. The previous owner told me it had 3.50 gear ratio. I have overhauled the front axle over the summer. When I took the inspection cover off I found no oil in it. Ordered from Toms Bronco a new locker, bearings, seals and ball joints to make it right as well as the suspension and lift kit I bought from them. New Spings in rear and new shocks. The only rust that I see is along the rear quarters where the body lines are. This is resent and would be an easy fix at this point. The painter did not get enough paint on the underside of the line. As for the rest of the body it is in very good shape. I have done mostly mechanical work to it. New poly gas tank, front suspension, rear suspension, front dana 44 was rebuilt with new posi and new window tracks, new heater core, new wiper arms and blades and some other stuff.. A few things that need to be done are, heater fan ( the fan bearings are starting to go on it) and change the rear end gears and seals. I have a new set of 4.11 gears that is available to the winner at an extra cost. If you would like to see this Bronco or test ride it let me know. I want to keep the truck but have another project.
It has a 200 CID rebuilt inline 6 with 3 speed trans