'76 D44 Diff. Breather/brake line junction block?

[airbur]

Anyone know where I can find a new one? I've found the breather by itself, but cannot find the brake line junction block that has the hole for the breather. I believe it's part #3022 on this diagram:

Thanks!

 

[Broncobowsher]

I don't see a 3022. Do you mean 4022, the hollow bolt with the breather nipple on it?

 

[methcat]

I don't see a 3022. Do you mean 4022, the hollow bolt with the breather nipple on it?

that's what i see too. the "block" is part of the brake line.

 

[garberz]

They are two separate pieces. The breather tube holds the block onto the housing. What do you need? both?

 

[DirtDonk]

Like Methcat said, it's part of the flex-line that comes from the H-block to the axle.
If yours is separate, it's either been replaced or has pulled out. If yours is missing, do you have the brake hose?

Paul

 

[airbur]

I don't see a 3022. Do you mean 4022, the hollow bolt with the breather nipple on it?

Yep, that's the part...should be 4022. I have the breather, just not the junction block it, along with the brake lines screws into.

 

[NJB71]

I bought the steel braided extended brake lines (axle to frame)from JBG, it is the junction w/ hole for breather....call and ask for mark....dont remeber the part #

 

[airbur]

I bought the steel braided extended brake lines (axle to frame)from JBG, it is the junction w/ hole for breather....call and ask for mark....dont remeber the part #

Thanks. I think I found it..... http://broncograveyard.com/bronco/i-12535_stainless_steel_front_brake_line__extended.htm That has 2 ports plus the hole for the breather.