• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

About to start my frame off. Fluid check

deltabronco

Bronco Guru
Joined
Dec 27, 2005
Messages
1,100
Will be starting up my frame off for the first time in 11 yrs.engine was rebuilt and the tranny was cleaned up and drained along with the rear end. So, i put 5 qrts of rotella with a zinc additive in the engine, 5 qts of atf in the tranny,( will add anther 3-4 while its running since i neglected to fill the torque converter) put coolant in the radiator, and gear oil in the rear end. Other than priming the oil pump, is ther anything else i need,to do? I will be breaking in the engine shortly afterwards.
 
OP
OP
deltabronco

deltabronco

Bronco Guru
Joined
Dec 27, 2005
Messages
1,100
Damn, tranny fluid is leaking from the transmission where it meets the transfer case. Any easy way to fix this??
 
Last edited:
Top