Adapter from manual tranny to Dana 20 question.

[reamer]

The adapter and "spud" shaft linking the manual tranny to the D-20, If I swap in a C-4 Auto, will the manual tranny adapter Bolt up with no problems?
Thanks
reamer

 

[stevew]

You'll need the C-4 adapter housing and spud shaft . Those parts are transmission specific .

 

[thegreatjustino]

The C4 requires a completely different adapter and a shorter spud shaft.

 

[Broncobowsher]

Isn't the C4 transmission output shaft Bronco specific as well?

 

[Jebus]

I have a Van 2X, pan fill C4 in the garage that the auto spud shaft fits onto the splines.

It looks like I can cut off the yoke threads and it will work. I could be wrong.

 

[Viperwolf1]

I have a Van 2X, pan fill C4 in the garage that the auto spud shaft fits onto the splines.

It looks like I can cut off the yoke threads and it will work. I could be wrong.

I think you'll find it's still too long. It must have a speedo gear taking up space between the splines and rear of C4.

 

[scottmbbp]

Got mine from TBP...