angled bracket for hydroboost

[bigmuddy]

Anyone know of someone that makes just the aluminum angled bracket for the hydroboost?

I am aware of the angled ones sold on ebay and Ive used a 77 angle bracket but looking for something simple.

 

[duffymahoney]

What intake do you have? The ones the vendors sell cleared all my engine bay and is nice and neat.

 

[bigmuddy]

Im sure they do.

I have a good hydroboost unit and really don't want to buy all new stuff. Previously, I had this on an old 77 bronco angled bracket but trying to get away from that. Hoping to just buy the little angled (round alum) bracket that most companies sell theirs with but unsure if anyone sells those by themselves.

Upper intake is a tubular cobra intake off the lightning engine.

 

[toddz69]

No one that I know of sells those brackets by themselves.

Todd Z.

 

[ba123]

Yeah, I wouldn't think so either, not to mention, your HB might not work perfectly in that bracket. I did remove the aluminum piece from my WH Hydroboost bracket to see what my choices were for making some slight changes for how I wanted it mounted but even removing it was a royal pain, not to mention needed a special socket to even fit in there.

WH might sell you just the HB unit and the bracket, but def wouldn't sell the bracket as they get them together I am pretty sure.

 

[bigmuddy]

No one that I know of sells those brackets by themselves.

Todd Z.

Thanks Todd, I thought that was the case. Might buy a new one and keep my old setup for a different low rent build.

 

[bigmuddy]

Yeah, I wouldn't think so either, not to mention, your HB might not work perfectly in that bracket. I did remove the aluminum piece from my WH Hydroboost bracket to see what my choices were for making some slight changes for how I wanted it mounted but even removing it was a royal pain, not to mention needed a special socket to even fit in there.

WH might sell you just the HB unit and the bracket, but def wouldn't sell the bracket as they get them together I am pretty sure.

Agreed.