another c-bushing question

[73stallion]

does anyone run 2 degree c-bushings with a 2 or 2 1/2" lift? pros, cons...

 

[broncnaz]

I dont but I would say nothing but Cons bad handling such as wandering streering wheel not returning to center ect. you need at least 4 deg bushings and some people run 7 deg with very good results. If yor in doubt take it to an alingment shop and have it checked it will probably be just barely within spec unlifted. once lifted it will need the bushings to keep it close

 

[73stallion]

i was afraid of that. i had it alligned not too long ago, and the camber was off and i have about 1 1/2" of lift right now. i also have a wear issue on the outside of my right front tire i can't seem to remedy, i wonder if this is the culperate...