Another door alignment question

[Tamnative3]

Replaced both “A” pillars with a friend and got the doors adjusted margins look pretty good but on the drivers hinge side the gap is a little large and I made the mistake of telling my friend that you can adjust certain areas by shimming the body mounts. I’m fine with the way it is but to appease him I thought I would see if I could get it a little better. After looking and thinking a bit I’m not sure which mounts if any would help. Any suggestions on previous experience would help me to fix it or tell him that it won’t work and just leave it alone.
thanks for any advice.

 

[Tamnative3]

I forgot to add that the gap is jmust at the top.

 

[Chrisblundell]

I would say play with the shims and see how it looks. I got my passenger side door to connect perfectly (At the expense of raising my right front body mount 3 inches). I am sure you won't need to go quite that extreme. but I didnt care how it looked, I just wanted the door to open and close until I get a new body