• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Any tips on installing a Dana 44?

taipeichris

Bronco Guru
Joined
May 11, 2006
Messages
1,753
Hi,

So it's just about time for me to install my coveted Dana 44! OOOUUU!

It's been sand blasted, repainted, resealed, re-geared, with new u-joints too.

I've done it all on the Bronco before except installing a front axel.

Any suggestions or tips on the install?

Any special or random tools recommended?

I'm going to be swaping my WH front disc brakes from the Dana 30 and the Dana 44.

Thanks!
Chris
taipeichris13@yahoo.com
 

Socal Tom

Bronco Guru
Joined
Feb 12, 2004
Messages
2,442
Loc.
San Diego, CA
You will need the D44 track bar and the D30 driveshaft will be a bit to long. Other than that its just the reverse of the D30.
Tom
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
Actually, I reused my Dana30 track bar. With a 2 1/2" suspension lift, the differential came out centered.

Read some of the links on replacing the front bushings. You pretty much have to pull the front differential to do that, plus you're installing the bushings anyway. Senior Chief gave you several links for info. Here's one more.

http://classicbroncos.com/forums/showthread.php?t=144905
 

bwm694202001

New Member
Joined
Sep 30, 2008
Messages
33
d44 swap

do you guys use the y type steering linkage or can you use the t type off the dana 30
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
do you guys use the y type steering linkage or can you use the t type off the dana 30
I used the T-type off the Dana 30, but I had to have the tie-rod extended. I did that by cutting off the drivers side (long side) tie-rod end, and having a machine shop thread that end for the passenger side tie-rod end sleeve.
 

Master Chief

Contributor
Bronco Guru
Joined
Nov 24, 2006
Messages
1,312
Quote:
Originally Posted by bwm694202001
do you guys use the y type steering linkage or can you use the t type off the dana 30


I used the T-type off the Dana 30, but I had to have the tie-rod extended. I did that by cutting off the drivers side (long side) tie-rod end, and having a machine shop thread that end for the passenger side tie-rod end sleeve.



I used the 3-way adjustable conversion from JBG, which has sure gone up in price...I just looked at it, the setup is 400 bucks.
For that price I would go Steve's route, a machine shop will be much easier on the wallet.
 
OP
OP
taipeichris

taipeichris

Bronco Guru
Joined
May 11, 2006
Messages
1,753
Thank you guys for the useful links on the install. MY BEERZ AWAIT...

On mine I took my stock y set up to my machine shop and now run two of the smaller stock outter tyerods with an adjustable center link. It was SO MUCH CHEAPER then the new set up.

Thanks!
Chris
 
OP
OP
taipeichris

taipeichris

Bronco Guru
Joined
May 11, 2006
Messages
1,753
Senor Chief,
Just wanted to thank you for providing the links to the how to install my Dana 44. I'm actually thinking of starting it on a Monday instead of the normal 6am on Saturday so once I get the c-caps off I can call and order the bushings from WH or someone who can ship fast. After all my 66 is my daily driver and I've got to get her back on the road fast! Wish me luck!

Chris-
 

Socal Tom

Bronco Guru
Joined
Feb 12, 2004
Messages
2,442
Loc.
San Diego, CA
Actually, I reused my Dana30 track bar. With a 2 1/2" suspension lift, the differential came out centered.

Read some of the links on replacing the front bushings. You pretty much have to pull the front differential to do that, plus you're installing the bushings anyway. Senior Chief gave you several links for info. Here's one more.

http://classicbroncos.com/forums/showthread.php?t=144905

The lengths are the same, but the D44 bend will clear the front diff, the D30 trac bar will gouge the diff on hard bumps.
Tom
BTDT
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
The lengths are the same, but the D44 bend will clear the front diff, the D30 trac bar will gouge the diff on hard bumps.
Tom
BTDT
I've heard/read people say that, but I only had the track bars from my Dana30 and the 76 Dana44. I didn't want the funky bushing at the frame side with the 76 track bar, so, not knowing any better, I installed the one from the Dana30. Did that over 10 years ago, and it has never hit the diffy cover. I guess every Bronco is different!
 
Top